
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

A breakout board for 32-pin AVR DB/DD series TQFP chips. With onboard regulators, VDD select solder jumper, VDDIO2 jumper and UDPI header
AVR128 Breakout is an open-source printed circuit board by FoxhoodDesigns, from the FoxhoodDesigns/AVR-DB-DD-Breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 20.8 × 41.4 mm with 20 parts on 36 nets, routed with 206 tracks and 19 vias.
It is built around the AP2112K-3.3. Its parts include 8 capacitors, 4 connectors, 3 ICs, 2 resistors and 1 diode. It belongs with the interfaces and adapters and power boards of this library.
This little Board is designed to allow for easy experimentation with AVR128DB32 and AVR64DD32 Microcontrollers. It is very minimalist with only the AVR itself, A pair of standard LDO linear regulators (1117-5V and a 2112-3.3V), A simple power indicator and some jumpers for configuring the board and/or VDDIO2 to 3.3V or 5V. Note: This relies on the Internal Oscillator which on the new generation of AVR chips can achieve pretty high speeds.
Both the DB and DD work. The DD is more suitable as a general purpose and is fairly cheap (comparable to a ATMega32PB), while the DB is more for bigger stuff. As one might guess by having up to a whopping 128Kb of Flash for code.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C7, C8 |
| 2 | 10uf | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C6 |
| 2 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3, J4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AVR128DB32x-xPT | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | AZ1117R-5.0 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP1 |

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…




It measures 20.8 × 41.4 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FoxhoodDesigns/AVR-DB-DD-Breakout repository on GitHub, at the commit this page was made from: the board is KiCad/AVR128 Breakout.kicad_pcb and its schematic AVR128 Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).