
Lunakey mini
yoichiro/lunakey
Lunakey - This is a brand for keyboards designed by Yoichiro Tanaka.

Pico Skidi is an open-source printed circuit board by Fortinbra, from the Fortinbra/Pico-Skidi repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 54 mm with 27 parts on 53 nets, routed with 388 tracks and 51 vias.
It is built around the PKLCS1212E4001-R1. Its parts include 7 connectors, 5 ICs, 4 capacitors and 4 resistors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2, M3, M4, M5, M6 |
| 4 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4 |
| 4 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 2 | PDRV8411PWPR | DRV8411:TSSOP_11PWPR_TEX | U3, U4 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Motor 1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Motor 2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Motor 3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Motor 4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PKLCS1212E4001-R1 | PKLCS1212:PKLCS_472x472_MUR | LS1 |
| 1 | Pico | pico-skidi:RPi_Pico_TH | U5 |
| 1 | RGBLED | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | ~ | pico-skidi:Pimoroni Amigo Pro Mounts | U2 |
| 1 | ~ | pico-skidi:TPS61023 | U1 |

yoichiro/lunakey
Lunakey - This is a brand for keyboards designed by Yoichiro Tanaka.

vpatkov/continuity-tester
Ultra low-voltage, low-current, and fast continuity tester



ArgonautGit/wallet_dmm
A multimeter the size of a credit card: DC volts, resistance, continuity and diode test, shown on a 0.91" OLED, with three buttons, an RGB LED and a piezo beeper.



Enoch36Yi/FumeHoods
A new reconstruction of the SashSense presence node: ESP32-S3-WROOM-1-N8, bare VL53L1X, bare AMG8833 and a transistor-driven piezo beeper.
It measures 42 × 54 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the PKLCS1212E4001-R1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Fortinbra/Pico-Skidi repository on GitHub, at the commit this page was made from: the board is Pico-Skidi.kicad_pcb and its schematic Extras.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).