

GP2040-CE Tester
- Size
- 75.5 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 279
- Pads
- 499
- Tracks, vias
- 450, 52
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Apr 2023
- Updated
- 6 May 2023
Overview
GP2040-CE Tester is an open-source printed circuit board by Fortinbra, from the Fortinbra/GP2040-CE-Tester repository on GitHub, published under the MIT licence. It is a 4-layer board of 75.5 × 54 mm with 68 parts on 279 nets, routed with 450 tracks and 52 vias.
It is built around the ATMEGA16U2-MU, ATMEGA2560-16AU and RP2040, with the MAX3421EEHJ+T, W25Q128JVSIQ and PTMUXHS221NKGR among its other parts. Its parts include 30 capacitors, 20 resistors, 9 ICs, 3 connectors and 2 diodes. It belongs with the RP2040 and AVR (ATmega, ATtiny) boards of this library.
Main components
9ATMEGA16U2-MU
QFN-32-EP(5x5)-40℃~+85℃ 16KB 16MHz 2.7V~5.5V 22 512Byte 512Byte 8 Bit AVR Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)MAX3421EEHJ+T
TQFP-32(5x5)-40℃~+85℃ 12Mbps 3V~3.6V 45mA 60uA Controller USB 2.0 TQFP-32(5x5) USB Converters ROHSMaxim Integrated (Analog Devices)USB ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHPTMUXHS221NKGR
-UncategorisedTexas InstrumentsSIT2018BE-S8-33N-12.000000G
SOT-23-5-40℃~+105℃ 12MHz 3.3V 4.7mA LVCMOS、LVTTL ±30ppm SOT-23-5 Programmable Oscillators ROHSSiTimeProgrammable OscillatorsTUSB4041IPAPR
TQFP-64(10x10)-40℃~+85℃ 1.1V、3.3V 33mA 4 480Mbps 86mA Hub I2C、SMBus USB 2.0 TQFP-64(10x10) USB HUB Controllers ROHSTexas InstrumentsUSB HUB ControllersSIT9003AC-24-33ED-16.00000T
SMD3225-4PSMD3225-4P Spread Spectrum Oscillators(SSOs) ROHSSiTimeSpread Spectrum Oscillators(SSOs)
README
README.mdGP2040-CE-Tester
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C9, C10, C24, C25, C27, C28, C29, C30 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R15, R16, R17, R18, R19 |
| 4 | 0.1μF | Capacitor_SMD:C_0603_1608Metric | C16, C18, C20, C23 |
| 4 | 22R | Resistor_SMD:R_0603_1608Metric | R13, R14, R20, R21 |
| 3 | 0.001μF | Capacitor_SMD:C_0603_1608Metric | C17, C19, C21 |
| 3 | 10KΩ 1% | Resistor_SMD:R_0402_1005Metric | R7, R10, R11 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8, C11 |
| 2 | 1μF | Capacitor_SMD:C_0603_1608Metric | C22, C26 |
| 2 | 24.7 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 4.7KΩ | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | SIT9003AC-24-33ED-16.00000T | GP2040-CE-Tester:SIT9003AC-24-33ED-16.00000T | Y1, Y2 |
| 2 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J2, J3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 10KΩ 1% | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 10μF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 1KΩ | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 90.9KΩ 1% | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | ATmega16U2-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U8 |
| 1 | ATmega2560-16A | Package_QFP:TQFP-100_14x14mm_P0.5mm | U7 |
| 1 | MAX3421EEHJ+T | GP2040-CE-Tester:MAX3421EEHJ+T | U9 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | PTMUXHS221NKGR | GP2040-CE-Tester:TMUXHS221N | U6 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SIT1602AC-33-33E-24.000000Y | GP2040-CE-Tester:SIT1602 | XTAL1 |
| 1 | SIT2018BE-S8-33N-12.000000G | GP2040-CE-Tester:SiT1630-S | U2 |
| 1 | TUSB4041IPAPR | GP2040-CE-Tester:TUSB4041I-Q1 | U5 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Similar boards
- 4 layers100 × 50 mm

- 2 layers101.6 × 53.3 mm

ADK MEGA 2560-REV3-append
sirkha/3D-Components
These are various components and assemblies that I have modeled for use in designing 3D printed objects.
100 parts - 2 layers101.6 × 53.3 mm

- 2 layers76 × 106 mm

- 2 layers95 × 90.5 mm

- 2 layers68.6 × 53.3 mm

Arduino Mega 2560
ded811/Mega-Uno-2560
An Arduino-compatible ATmega2560 development board in the Arduino Uno form factor
62 parts1 - 2 layers101.6 × 53.3 mm

Ebenezer Boadi Boateng 01230884B (1)
EbenezerBoadiBoateng/Arduino-Mega-260-R3-Ebenezer-Boadi-01230884b-
Recreating an Arduino mega on a kicad
84 parts1 - 2 layers101.6 × 53.3 mm

Questions
How big is the GP2040-CE Tester PCB?
It measures 75.5 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the GP2040-CE Tester use?
68 parts, built around the ATMEGA16U2-MU, ATMEGA2560-16AU, RP2040 and MAX3421EEHJ+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GP2040-CE Tester KiCad files?
From the Fortinbra/GP2040-CE-Tester repository on GitHub, at the commit this page was made from: the board is GP2040-CE Tester/GP2040-CE Tester.kicad_pcb and its schematic GP2040-CE Tester/GP2040-CE Tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GP2040-CE Tester design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).