

Ebenezer Boadi Boateng 01230884B (1)
Recreating an Arduino mega on a kicad
- Size
- 101.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 199
- Pads
- 560
- Tracks, vias
- 1,226, 110
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Jul 2026
- Updated
- 26 Jul 2026
Overview
Ebenezer Boadi Boateng 01230884B (1) is an open-source printed circuit board by EbenezerBoadiBoateng, from the EbenezerBoadiBoateng/Arduino-Mega-260-R3-Ebenezer-Boadi-01230884b- repository on GitHub. It is a 2-layer board of 101.6 × 53.3 mm with 84 parts on 199 nets, routed with 1,226 tracks and 110 vias.
It is built around the ATMEGA16U2-MU, ATMEGA2560-16AU and LP2985-30DBV. Its parts include 23 resistors, 17 capacitors, 12 connectors, 7 diodes and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA16U2-MU
QFN-32-EP(5x5)-40℃~+85℃ 16KB 16MHz 2.7V~5.5V 22 512Byte 512Byte 8 Bit AVR Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LP2985-30DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 198mV@(150mA) 30uVrms 3V 70dB@(1kHz) 750uA Fixed Over Current Protection、Over Temperature Protection、Soft Start Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | R | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +4 |
| 15 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 6 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4, MH5, MH6 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D6, D7 |
| 3 | R | Resistor_SMD:R_0201_0603Metric | R21, R22, R23 |
| 2 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3, J5 |
| 2 | C_Polarized | Capacitor_SMD:CP_Elec_4x3 | C16, C17 |
| 2 | Conn_02x03_Counter_Clockwise | Connector_PinSocket_2.00mm:PinSocket_2x03_P2.00mm_Vertical | J16, J18 |
| 2 | Fuse | Fuse:Fuse_0603_1608Metric | F3, F4 |
| 2 | LED | LED_SMD:LED_0201_0603Metric | D4, D5 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D2, D3 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 2 | Varistor | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV1, RV2 |
| 1 | AD813 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U4 |
| 1 | ATmega16U2-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U2 |
| 1 | ATmega2560-16A | Package_QFP:TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J13 |
| 1 | Communication | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_PinSocket_1.00mm:PinSocket_2x02_P1.00mm_Vertical_SMD | J19 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y2 |
| 1 | Digital | Connector_PinSocket_2.54mm:PinSocket_2x18_P2.54mm_Vertical | J7 |
| 1 | LP2985-3.0 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | NCP1117-1.5_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Q_PMOS | Package_TO_SOT_SMD:Infineon_PG-HSOF-8-1_ThermalVias | Q1 |
| 1 | Resonator | Crystal:Resonator_Murata_DSS6-3Pin_W7.0mm_H2.5mm | Y1 |
| 1 | SW_DPST_x2 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J17 |
Similar boards
- 2 layers80 × 30 mm

- 4 layers33 × 28 mm

- 4 layers80.2 × 80.2 mm

- 2 layers86 × 79.1 mm

- 2 layers101.6 × 53.3 mm

- 2 layers76 × 106 mm

- 2 layers95 × 90.5 mm

- 2 layers68.6 × 53.3 mm

Arduino Mega 2560
ded811/Mega-Uno-2560
An Arduino-compatible ATmega2560 development board in the Arduino Uno form factor
62 parts1
Questions
How big is the Ebenezer Boadi Boateng 01230884B (1) PCB?
It measures 101.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ebenezer Boadi Boateng 01230884B (1) use?
84 parts, built around the ATMEGA16U2-MU, ATMEGA2560-16AU and LP2985-30DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ebenezer Boadi Boateng 01230884B (1) KiCad files?
From the EbenezerBoadiBoateng/Arduino-Mega-260-R3-Ebenezer-Boadi-01230884b- repository on GitHub, at the commit this page was made from: the board is Ebenezer Boadi Boateng 01230884B (1).kicad_pcb and its schematic Ebenezer Boadi Boateng 01230884B (1).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ebenezer Boadi Boateng 01230884B (1) design in my own project?
Its repository states no licence, so its author keeps all rights: ask EbenezerBoadiBoateng before reusing the design.