
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

A very simple white noise generator using an ESP32 (C3-SuperMini) and an audio amplifier. I made this to help me sleep. Its kinda hard for me to sleep, especially with noises, even if it is small.
White noise is an open-source printed circuit board by FazalThe, from the FazalThe/white-noise repository on GitHub. It is a 2-layer board of 92.7 × 75 mm with 26 parts on 27 nets, routed with 86 tracks and 3 vias.
It is built around the AP2112K-3.3. Its parts include 5 capacitors, 3 resistors, 3 ICs, 1 diode and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.

A very simple white noise generator using an ESP32 (C3-SuperMini) and an audio amplifier. I made this to help me sleep. Its kinda hard for me to sleep, especially with noises, even if it is small. White/pink noise is more comfortable for me. Also this will help blockout small noises



build folder inside the firmware folder in terminal.esptool.py --chip esp32c3 --baud 460800 write_flash \
0x0000 bootloader.bin \
0x8000 partitions.bin \
0xE000 boot_app0.bin \
0x10000 firmware.bin| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5 |
| 2 | 1u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C4, C5 |
| 2 | MOUNTINGHOLE2.5 | MOUNTINGHOLE_2.5_PLATED | U$9, U$10 |
| 1 | 1X07_ROUND_76 | JP1 | |
| 1 | TERMBLOCK_1X2-3.5MM | X1 | |
| 1 | SYMBOL_PLUS | U$6 | |
| 1 | SYMBOL_MINUS | U$11 | |
| 1 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 1048P | battery holder:BAT_1048P | BT1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | ESP32-C3_SUPERMINI_TH | kicad:MODULE_ESP32-C3_SUPERMINI_TH | U1 |
| 1 | GRN | LED_THT:LED_D5.0mm | D2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | R_Potentiometer | potentiometer:TRIM_WH148-1A-2-18T-L20 | RV1 |

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…




It measures 92.7 × 75 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FazalThe/white-noise repository on GitHub, at the commit this page was made from: the board is PCB/White noise.kicad_pcb and its schematic PCB/White noise.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FazalThe before reusing the design.