

Mistress
How does it work? The mn3207 does contain a memory of 1024 steps, the 'bucket brigade'. The analog signal goes in, moves through the 'brigade' and goes to the output stage.
- Size
- 83 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 57
- Pads
- 234
- Tracks, vias
- 967, 55
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Oct 2020
- Updated
- 21 Oct 2020
Overview
Mistress is an open-source printed circuit board by FandSonthesizer, from the FandSonthesizer/ElectricMistress repository on GitHub. It is a 2-layer board of 83 × 85 mm with 82 parts on 57 nets, routed with 967 tracks and 55 vias.
It is built around the RC4558D and LM311. Its parts include 39 resistors, 26 capacitors, 6 ICs, 4 connectors and 3 diodes.
Main components
2README
README.mdElectricMistress
This is the F&S version of this classic flanger effect. We based our PCB on the schematics from Thomeeque's EM3207. Sounds really nice and is reasonable easy to build, check out our demo on youtube https://www.youtube.com/watch?v=bW4K1UdQq3Q
How does it work? The mn3207 does contain a memory of 1024 steps, the 'bucket brigade'. The analog signal goes in, moves through the 'brigade' and goes to the output stage. The faster the chip is clocked, the shorter the delay time is and vice versa. The clock is generated by a VCO around the LM311, then it is converted to the bi-phase clock signal the BBD chip needs. The VCO itself is modulated by the LFO consisting of U3 a,b,c. The clock rate varies from around 100kHz to a couple of hundred kHz. U1a boosts the input signal and U1b takes care of the feedback mix. Q1 is the output driver.
Fun fact: the clock driver cd4049 can be substituted by a cd4050 chip.
We have included a tiff file that you can print, cut out and fold around a 1590bb enclosure to let you know where to drill the holes.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | NilsLib:Kondensator_Keramik | C15, C19, C21, C23, C24, C25 |
| 6 | 10k | NilsLib:Widerstand_liegend | R6, R17, R18, R20, R29, R38 |
| 4 | 47k | NilsLib:Widerstand_liegend | R16, R22, R23, R31 |
| 3 | 1N4148 | NilsLib:Diode_Horizontal | D1, D2, D3 |
| 3 | 220u | NilsLib:Elko_D6.3mm_P2.50mm | C1, C3, C4 |
| 3 | 4,7k | NilsLib:Widerstand_liegend | R10, R14, R15 |
| 3 | 47n | NilsLib:Kondensator_Keramik | C6, C12, C14 |
| 2 | 100k | NilsLib:Widerstand_liegend | R3, R9 |
| 2 | 1k | NilsLib:Widerstand_liegend | R12, R28 |
| 2 | 1u | NilsLib:Elko_D6.3mm_P2.50mm | C20, C26 |
| 2 | 3,9k | NilsLib:Widerstand_liegend | R30, R37 |
| 2 | 33u | NilsLib:Elko_D6.3mm_P2.50mm | C17, C18 |
| 2 | 39k | NilsLib:Widerstand_liegend | R24, R34 |
| 1 | 1,2M | NilsLib:Widerstand_liegend | R35 |
| 1 | 10 | NilsLib:Widerstand_liegend | R1 |
| 1 | 10k | NilsLib:Trimmer_Vertical | T1 |
| 1 | 10n | NilsLib:Kondensator_Keramik | C5 |
| 1 | 10u | NilsLib:Elko_D6.3mm_P2.50mm | C16 |
| 1 | 14k | NilsLib:Widerstand_liegend | R13 |
| 1 | 150p | NilsLib:Kondensator_Keramik | C2 |
| 1 | 1M | NilsLib:Widerstand_liegend | R5 |
| 1 | 1n | NilsLib:Kondensator_Keramik | C7 |
| 1 | 2,2M | NilsLib:Widerstand_liegend | R2 |
| 1 | 2,2n | NilsLib:Kondensator_Keramik | C8 |
| 1 | 220n | NilsLib:Kondensator_Keramik | C13 |
| 1 | 22k | NilsLib:Widerstand_liegend | R33 |
| 1 | 22k | NilsLib:Trimmer_Vertical | T2 |
| 1 | 22p | NilsLib:Kondensator_Keramik | C22 |
| 1 | 24k | NilsLib:Widerstand_liegend | R25 |
| 1 | 27k | NilsLib:Widerstand_liegend | R32 |
| 1 | 2N3904 | NilsLib:TO-92_Wide_NIK | Q1 |
| 1 | 2N3906 | NilsLib:TO-92_Wide_NIK | Q2 |
| 1 | 3,6k | NilsLib:Widerstand_liegend | R7 |
| 1 | 30k | NilsLib:Widerstand_liegend | R27 |
| 1 | 33k | NilsLib:Widerstand_liegend | R39 |
| 1 | 4,7u | NilsLib:Elko_D6.3mm_P2.50mm | C9 |
| 1 | 4013 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U4 |
| 1 | 4049 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U6 |
| 1 | 47 | NilsLib:Widerstand_liegend | R4 |
| 1 | 470 | NilsLib:Widerstand_liegend | R19 |
| 1 | 470k | NilsLib:Widerstand_liegend | R8 |
| 1 | 5,6k | NilsLib:Widerstand_liegend | R11 |
| 1 | 510 | NilsLib:Widerstand_liegend | R21 |
| 1 | 62k | NilsLib:Widerstand_liegend | R36 |
| 1 | 680p | NilsLib:Kondensator_Keramik | C10 |
| 1 | 8,2k | NilsLib:Widerstand_liegend | R26 |
| 1 | 82n | NilsLib:Kondensator_Keramik | C11 |
| 1 | IO | NilsLib:PinHeader_1x04_P2.54mm_Vertical_NIK | J3 |
| 1 | LM311 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U5 |
| 1 | MN3207 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | PWR | NilsLib:Stift_x02 | J1 |
| 1 | RC4558 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Range | NilsLib:PinHeader_1x08_P2.54mm_Vertical_Nik | J4 |
| 1 | Rate | NilsLib:PinHeader_1x04_P2.54mm_Vertical_NIK | J2 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U3 |
Similar boards
- 2 layers60 × 85 mm

- 4 layers131.5 × 128 mm

Main PCB
rgalland/PC-Engine_CDR-30A_Schematics
Schematics of the PC-Engine CD-ROM2 - Includes comments about differences between CDR-30A and the older CDR-30
342 parts15GPL-3.0 - 2 layers350 × 200 mm

Deep field preamp
DeepFieldAudio/Deep-field-preamp-V1
the deep field preamp is a 4 way preamp. It features 4 way crossover with kill and volume, 4 band parametric EQ, 12 band graph EQ, phono and line inputs for music, 2 aux input, 1 mic input and 2 FX loops
699 parts6CC-BY-SA-4.0 - 2 layers84.5 × 108.3 mm

Phasor II
JordanAceto/Phasor_II
6-stage optical phase shifter pedal ala the Mu-tron II with extra features
196 parts6CC-BY-4.0 - 2 layers140 × 125 mm

- 2 layers72 × 133 mm

- 2 layers60 × 43 mm

- 2 layers115.8 × 142.7 mm

S OS OPN
yanataka60/S-OS_OPN
Oh!MZに掲載されたハード版S-OS"MACE" I/Oポート及びFM音源ボートを1枚にまとめMZ-2000の拡張ボードとして設計してみました
91 parts1MIT
Questions
How big is the Mistress PCB?
It measures 83 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mistress use?
82 parts, built around the RC4558D and LM311. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mistress KiCad files?
From the FandSonthesizer/ElectricMistress repository on GitHub, at the commit this page was made from: the board is Mistress/Mistress.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mistress design in my own project?
Its repository states no licence, so its author keeps all rights: ask FandSonthesizer before reusing the design.