Skip to the content
2 layersTc2 labo kicad, the printed circuit board in 3D

This repository contains all the university proyects done through my career and extracurricular laboratory.

Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
20
Pads
97
Tracks, vias
236, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Dec 2024
Updated
24 Mar 2026

Overview

Tc2 labo kicad is an open-source printed circuit board by FacundoCostarelli, from the FacundoCostarelli/University_Projects repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 34 parts on 20 nets, routed with 236 tracks and 0 vias.

It is built around the LM324. Its parts include 16 resistors, 8 capacitors, 4 connectors and 2 ICs.

Main components

1

Parts

34
QtyValueFootprintReferences
6100nCapacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_HorizontalC3, C4, C5, C6, C7, C8
52k2Resistor_SMD:R_1206_3216MetricR1, R5, R6, R12, R16
41kResistor_SMD:R_1206_3216MetricR7, R8, R13, R14
4R_PotentiometerPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1, RV2, RV3, RV4
3Screw_Terminal_01x02TerminalBlock_Altech:Altech_AK100_1x02_P5.00mmJ2, J3, J4
2220Resistor_SMD:R_1206_3216MetricR2, R11
2390Resistor_SMD:R_1206_3216MetricR3, R4
2C_PolarizedCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC1, C2
2LM324Package_DIP:DIP-14_W7.62mm_Socket_LongPadsU1, U2
11K2Resistor_SMD:R_1206_3216MetricR10
11k8Resistor_SMD:R_1206_3216MetricR15
12kResistor_SMD:R_1206_3216MetricR9
1Screw_Terminal_01x03TerminalBlock_Altech:Altech_AK100_1x03_P5.00mmJ1

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers36.8 × 34.7 mmTinylab proto1, the printed circuit board in 3D

    Tinylab proto1

    espotek-org/Labrador

    EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

    79 parts1.2k
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers231.1 × 106.7 mmSnark barker, the printed circuit board in 3D

    Snark barker

    schlae/snark-barker

    A 100% compatible replica of the famed SB 1.0 sound card

    199 parts687
  • 4 layers82.6 × 82.6 mmJumperlessV5r8, the printed circuit board in 3D

    JumperlessV5r8

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    650 parts332
  • 4 layers72.4 × 95.3 mmDingoPDM, the printed circuit board in 3D

    DingoPDM

    corygrant/dingoPDM

    Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

    156 parts128MIT
  • 2 layers191.5 × 76 mmPcb project, the printed circuit board in 3D

    Pcb project

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    337 parts117GPL-3.0
  • 4 layers292.1 × 88.3 mmSnark barker mca, the printed circuit board in 3D

    Snark barker mca

    schlae/snark-barker-mca

    A Sound Blaster compatible sound card for Micro Channel bus computers

    177 parts69

Questions

What parts does the Tc2 labo kicad use?

34 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tc2 labo kicad KiCad files?

From the FacundoCostarelli/University_Projects repository on GitHub, at the commit this page was made from: the board is Analysis_Work/ENG/Design_Simulation_&_Analysis_Of_Analog_Circuits/4_Active_Analog_Filter/KicadDesign/tc2_labo_kicad.kicad_pcb and its schematic Analysis_Work/ENG/Design_Simulation_&_Analysis_Of_Analog_Circuits/4_Active_Analog_Filter/KicadDesign/tc2_labo_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tc2 labo kicad design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).