2 layers158.3 × 78.5 mm
Fsckpad hardware revision0.9
FSCK-Pad/fsckpad-hardware
Openhardware game controller/emulation handheld
43 partsMIT
2 layers158.1 × 78.3 mm
Fsckpad hardware
FSCK-Pad/fsckpad-hardwareOpenhardware game controller/emulation handheld
- Size
- 158.1 × 78.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 86
- Pads
- 366
- Tracks, vias
- 809, 157
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Jun 2024
- Updated
- 12 Jun 2025
Overview
Fsckpad hardware is an open-source printed circuit board by FSCK-Pad, from the FSCK-Pad/fsckpad-hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 158.1 × 78.3 mm with 55 parts on 86 nets, routed with 809 tracks and 157 vias.
It is built around the DRV2605LDGS, PCA9555D and ICM-42670-P, with the COM-09032 and PTS645VH15 among its other parts. Its parts include 6 ICs, 5 capacitors and 4 resistors.
Main components
5
DRV2605LDGS
VSSOP-10-0.5mm-40℃~+85℃ 1 2V~5.2V 500uA I2C Yes VSSOP-10-0.5mm Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor Drivers
PCA9555D
SO-24-300milReset function、Cascading and address extension SO-24-300mil I/O Expanders ROHSNXP SemiconductorsI/O Expanders
ICM-42670-P
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2.25KB 3.5uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C、I3C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometersCOM-09032
插件插件 Multi-Directional Switches ROHSSparkFun ElectronicsMulti-Directional SwitchesPTS645VH15
--10℃~+60℃ 12V 2N 50mA Right Angle SPST-NO - Tactile Switches ROHSC&KTactile Switches
README
README.mdFSCKPad Hardware
Openhardware game controller/emulation handheld
Installation
cd fsckpad-hardware
make install-dev
Usage
$ make help
$ make build
Created from device-cookiecutter, https://github.com/crashfrog/device-cookiecutter
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1-TS009 | JSP_Footprints:SW_Push_1TS009_Conductive_Pad | +D1, +L1, +R1, +U1, A1, B1, POW1, Select1, Start1, X1, Y1 |
| 5 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1, H2, H3, H4, H5 |
| 2 | 1-TS009 | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | LPDL1, RPDL1 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 1pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | A1301EUA-T | Package_TO_SOT_THT:TO-92Flat | LT1, RT1 |
| 2 | COM-09032 | COM-09032:XDCR_COM-09032 | LS1, RS1 |
| 2 | Conn_01x01_Pin | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | LTouch1, RTouch1 |
| 2 | Conn_01x13 | JSP_Footprints:BridgeableComb_1x13 | PSOrient, XBOrient |
| 2 | Fiducial | JSP_Footprints:6.5mm_MouseBite | Bite1, Bite2 |
| 2 | LS20-S | digikey-kicad-library:SOIC-20_W7.5mm | IC1, IC6 |
| 2 | PCA9555D | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | IC4, IC5 |
| 2 | PTS645V | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | LB1, RB1 |
| 1 | 0 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | LRAEnable |
| 1 | 0.1 uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 2.2uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | Feather |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | STEMMA-QT1 |
| 1 | Conn_01x13 | JSP_Footprints:BridgeableComb_1x13_Reverse | Mate |
| 1 | Conn_01x18_Pin | Connector_FFC-FPC:Hirose_FH12-18S-0.5SH_1x18-1MP_P0.50mm_Horizontal | EYESPI1 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_1.00mm:PinHeader_2x02_P1.00mm_Vertical | LRA/ERM1 |
| 1 | Conn_02x02_Top_Bottom | Connector_PinHeader_1.00mm:PinHeader_2x02_P1.00mm_Vertical | Ext5 |
| 1 | Conn_02x07_Counter_Clockwise | Connector_PinHeader_1.00mm:PinHeader_2x06_P1.00mm_Vertical | Ext4 |
| 1 | DRV2605LDGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | Fiducial | Symbol:OSHW-Logo2_24.3x20mm_SilkScreen | Centroid1 |
| 1 | H1 | Connector_PinHeader_1.00mm:PinHeader_2x02_P1.00mm_Vertical | Ext1 |
| 1 | ICM-42670-P | ICM-42670-P:XDCR_ICM-42670-P | IC3 |
More from FSCK-Pad/fsckpad-hardware
1Similar boards
- 2 layers237.3 × 103.7 mm
- 2 layers171.7 × 103.2 mm
Macropad v2
Anycircle11139s/Macropad-v2
I wanted to make a second version of my macropad because I was confident, that with my improved skills, I could cook up something better. I spent a long time creating this, and I'm really proud of what I made.
70 parts - 4 layers80 × 80 mm
- 2 layers155.9 × 91.9 mm
- 2 layers330 × 123 mm
Riptide
SharKingStudios/Riptide
An Infinitely Expandable Keyboard built during Hackclub Highway!
270 parts18MIT - 2 layers100 × 86.5 mm
SensactHs
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
319 parts4Apache-2.0 - 2 layers203 × 88 mm
RICM pico
elatorre20/RICM_pico
The software for a raspberry PIco-based kit board for a tic-tac-toe game. The board is mostly based on I2C devices, and will be simple to assemble so that we can use it in children's workshops.
68 parts2GPL-3.0 - 2 layers428.6 × 161.9 mm
Keyboard mk1
bobby1321/Colossus-Of-Codes
Custom keyboard layout, called the Colossus of Codes (like Rhodes)
280 parts1MIT
Questions
How big is the Fsckpad hardware PCB?
It measures 158.1 × 78.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fsckpad hardware use?
55 parts, built around the DRV2605LDGS, PCA9555D, ICM-42670-P and COM-09032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fsckpad hardware KiCad files?
From the FSCK-Pad/fsckpad-hardware repository on GitHub, at the commit this page was made from: the board is fsckpad-hardware/fsckpad-hardware.kicad_pcb and its schematic fsckpad-hardware/fsckpad-hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fsckpad hardware design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).