Skip to the content
2 layers8.7 × 48.4 mm3V USB, the printed circuit board in 3D

A simple PCB design for JLCPCB surface mount production that convers 5V to 3.3V

Size
8.7 × 48.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
6
Pads
42
Tracks, vias
31, 18
Pours
5
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
12 Nov 2024
Updated
12 Nov 2024

Overview

3V USB is an open-source printed circuit board by Eucitzen, from the Eucitzen/USB_to_3V repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 8.7 × 48.4 mm with 13 parts on 6 nets, routed with 31 tracks and 18 vias.

It is built around the AMS1117-3.3. Its parts include 4 capacitors, 2 resistors, 1 IC and 1 connector.

Main components

1

README

README.md

USB_to_3V

A simple PCB design for JLCPCB surface mount production that convers 5V to 3.3V

Parts

13
QtyValueFootprintReferences
2MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2
2TestPointTestPoint:TestPoint_Pad_2.0x2.0mmTP1, TP2
110uF 0603Capacitor_SMD:C_0201_0603MetricC1
11uFCapacitor_SMD:C_0201_0603MetricC2
11uF tantalumCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC4
122uF tantalumCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC3
156K 0603Resistor_SMD:R_0201_0603MetricR2
156k 0603Resistor_SMD:R_0201_0603MetricR1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1FerriteBeadInductor_SMD:L_0201_0603MetricFB1
1USB_C_Plug_USB2.0Footprint:TYPE-C-31-M-17P1

Similar boards

  • 2 layers290.1 × 130 mmPro V2, the printed circuit board in 3D

    Pro V2

    kata0510/Lily58

    6×4+4keys column-staggered split keyboard.

    312 parts2.3k
  • 2 layers26.2 × 45.5 mmPL18 multiprotocol, the printed circuit board in 3D

    PL18 multiprotocol

    pascallanger/DIY-Multiprotocol-TX-Module

    Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

    24 parts1.9kGPL-3.0
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers85 × 56 mmPslab mini, the printed circuit board in 3D

    Pslab mini

    fossasia/pslab-mini-hardware

    PSLab Mini Hardware https://pslab.io

    182 parts1.2kApache-2.0
  • 4 layers100 × 54 mm32Bit shift register, the printed circuit board in 3D

    32Bit shift register

    MaltWhiskey/Mega-Cube

    16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

    64 parts766
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 2 layers59.1 × 99.9 mmCheap FOCer 2 60mm, the printed circuit board in 3D

    Cheap FOCer 2 60mm

    shamansystems/Cheap-FOCer-2

    Low-Cost Motor Controller based on the VESC 6

    193 parts407

Questions

How big is the 3V USB PCB?

It measures 8.7 × 48.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 3V USB use?

13 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 3V USB KiCad files?

From the Eucitzen/USB_to_3V repository on GitHub, at the commit this page was made from: the board is 3V USB/3V USB.kicad_pcb and its schematic 3V USB/3V USB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 3V USB design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).