
SI4735
EthicalEarth/Radio_SI4735_v1.0_stable
Stable final release of DSP Radio based on si4735 chip.

DSP_SSB_RADIO_SI4735
SI4735 is an open-source printed circuit board by EthicalEarth, from the EthicalEarth/Radio_SI4735 repository on GitHub. It is a 2-layer board of 50.8 × 38.8 mm with 43 parts on 33 nets, routed with 4,118 tracks and 0 vias.
It is built around the SI4735-D60-GU, AMS1117-3.3 and AMS1117-5.0. Its parts include 14 capacitors, 13 resistors, 5 connectors, 4 diodes and 3 ICs.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100R | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R13 |
| 4 | 20uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4, C8, C14, C15 |
| 4 | BAW75 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R4, R5, R6 |
| 3 | 4.7k | Resistor_SMD:R_1206_3216Metric | R10, R12, R14 |
| 2 | 0.01uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C11, C12 |
| 2 | 0.2k | Resistor_SMD:R_1206_3216Metric | R7, R8 |
| 2 | 2.2uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C9, C10 |
| 2 | 22pF | Capacitor_SMD:C_1206_3216Metric | C2, C3 |
| 2 | L | Inductor_THT:L_Radial_D6.0mm_P4.00mm | L1, L2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C5 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 32.768kHz | Crystal:Crystal_Round_D3.0mm_Vertical | Y1 |
| 1 | 33nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C7 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R11 |
| 1 | 470nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AM_IN | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | J2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | FM_IN | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | J3 |
| 1 | LOGO | Logo:Logo | G*** |
| 1 | Si4735-D60-GU | Package_SO:SSOP-24_3.9x8.7mm_P0.635mm | U2 |

EthicalEarth/Radio_SI4735_v1.0_stable
Stable final release of DSP Radio based on si4735 chip.

LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios


ngc6589/Si4735_Radio_RaspberryPiPico
Raspberry Pi Pico とタッチ液晶で Si4735 DSP ラジオを作成しました

Hasnat4763/Akash-Chowa-DX
Akash Chowa DX is a SW/MW/LW receiver designed based on the Si4735 Radio receiver IC paired with the RP2040 Zero Dev board.

SREERAJSVT/SiSeriesRadio
This project details the design and development of a Si4732/Si4735 based radio receiver utilizing a Raspberry Pi Pico for control and a custom-designed PCB


It measures 50.8 × 38.8 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the SI4735-D60-GU, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EthicalEarth/Radio_SI4735 repository on GitHub, at the commit this page was made from: the board is SI4735.kicad_pcb and its schematic SI4735.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EthicalEarth before reusing the design.