

Ecout Terre PCB V2
- Size
- 92.3 × 72.5 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 131
- Nets
- 108
- Pads
- 411
- Tracks, vias
- 1,119, 98
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Jan 2023
- Updated
- 6 May 2023
Overview
Ecout Terre PCB V2 is an open-source printed circuit board by EricGingras, from the EricGingras/Ecou-Terre repository on GitHub. It is a 4-layer board of 92.3 × 72.5 mm with 131 parts on 108 nets, routed with 1,119 tracks and 98 vias.
It is built around the OPA1656ID, LM3478MA and LM386, with the PCM1804DB, 74LVT04D and MC33269D among its other parts. Its parts include 44 capacitors, 40 resistors, 18 connectors, 8 ICs and 7 diodes.
Main components
9OPA1656ID
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+125℃ 100mA 120dB 1mV 2 20pA 20pA 24V/us 2uV/℃ 3.9mA 4.3nV/√Hz@1kHz 4.5V~36V 53MHz Rail-to-rail output SOIC-8 FET Input Amplifiers ROHSTexas InstrumentsAudio AmplifiersLM3478MA
SOIC-8-40℃~+125℃@(TJ) 1 1MHz 2.97V~40V Boost Boost、SEPIC、Flyback External No SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmpsPCM1804DB
SSOP-28-10℃~+70℃ 192kHz 2 24 4.75V~5.25V Audio Analog-to-Digital Converter Built-in I2S SSOP-28-208mil ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose74LVT04D
SOIC-14-40℃~+85℃ 1 2.7V~3.6V 20mA 2V 32mA 74LVT 800mV SOIC-14 Inverters ROHSNexperiaInvertersMC33269D
SOIC-8-40℃~+125℃@(Ta) 1 1.35V@(800mA) 20V 55dB@(120Hz) 800mA Adjustable Over Temperature Protection、Short Circuit Protection Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTS3480CX33 RFG
SOT-23-40℃~+125℃ 1 1.1V@(100mA) 100mA 3.3V 35V 5mA Fixed Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTaiwan SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators7V-22.5792MAHV-T
SMD3225-4PCrystalsTXC CorpCSD16327Q3
VSON-CLIP-8(3.3x3.3)-55℃~+150℃ 1 N-channel 1.3nF 1.4V 112A 25V 6.5mΩ@3V 65pF 74W 8.4nC@4.5V 960pF N-Channel VSON-CLIP-8(3.3x3.3) MOSFETs ROHSTexas InstrumentsMOSFETs
README
README.mdÉcou-Terre
Déscription du projet: Nous sommes en train de concevoir un module qui peut capter les bruits émis par les vers de terre, offrant ainsi une perspective sur la biodiversité et la santé des sols. Ceci est le répertoire git de tous les fichiers techniques pour notre projet.

Déscription technique: Nous utilisons un microphone électret pour capter le bruit des vers de terre. Ce signal est ensuite amplifié et numérisé pour pouvoir le transmettre dans un ESP-32 en format I2S. Par la suite, ces données I2S sont enregistrées dans une carte SD en format WAV, ce qui permet ensuite de les écouter sur un ordinateur. Il y a aussi un connecteur jack 3,5mm pour l'écoute en temps réelle des vers de terre. Éventuellement, nous souhaitons ajouter un module GPS pouvant indiquer la position géographique de tous les échantillons sonores prélevés. Le module au complet est alimenté par une pile 4.2 volts. Pour le contrôler, nous allons avoir un page web avec un interface pour le démarrage, l'ârret et d'autre fonctions du module.
Fichiers
Déscription des fichiers dans le répertoire git.
- 3d_print: Contient les fichiers pour la seule impression 3d que nous avons fait pour notre projet à date: une base pour le boîtier.
- Documentation_pieces: Contient tous les fichiers de documentation pour les pièces principales qui se retrouvent sur le module.
- Documentation_session5: Contient des fichiers de la session passée qui servent encore pour notre projet.
- Fichier_PCB: Contient tous les fichiers KiCad pour les PCB.
- Prog_ESP-32: Contient le code pour l'enregistrement des données I2S qui utilisait ESP-IDF ainsi que le code pour le serveur web qui servira à contrôler le module.
Parts
131| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R37, R38 +3 |
| 11 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C14, C17, C29, C30, C31, C32, C33, C34, C40, C42 |
| 8 | , , , , , , , | ||
| 8 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C13, C16, C39, C41, C43, C44 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23, C27, C28, C35, C36 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5, C6 |
| 4 | D_Z_2V4 | Diode_SMD:D_SOD-123 | D2, D3, D4, D5 |
| 3 | 10pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C18, C24 |
| 2 | 0.022uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C21 |
| 2 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R17 |
| 2 | 180uF | Capacitor_SMD:CP_Elec_6.3x9.9 | C3, C10 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C38 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R16 |
| 2 | Conn_ESP | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J7, J8 |
| 2 | OPA1656 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U8 |
| 1 | 0.047uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 1.25k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1000 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100k | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 1 | 27k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 3.3uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 3.3uH | Inductor_SMD:L_Vishay_IHLP-4040 | L1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 3300pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 470uF | Capacitor_SMD:C_Elec_8x10.2 | C26 |
| 1 | 56nF | Capacitor_SMD:C_0504_1310Metric_Pad0.83x1.28mm_HandSolder | C8 |
| 1 | 6.8k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 680 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36 |
| 1 | 74LVT04 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U7 |
| 1 | 75k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 7V-22.5792MAHV-T | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 8m | Resistor_SMD:R_0815_2038Metric_Pad1.20x4.05mm_HandSolder | R6 |
| 1 | 9.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal | J3 |
| 1 | CSD16327Q3 | Package_SON:VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q1 |
| 1 | Conn_01x01_Male | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J12 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | Conn_Alim | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J5 |
| 1 | Conn_Audio_Alim | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J14 |
| 1 | Conn_Audio_Diff | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J15 |
| 1 | Conn_GPS | Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_Vertical | J13 |
| 1 | Conn_Main_Alim | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J16 |
| 1 | Conn_Main_Diff | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J17 |
| 1 | DEL_3V3 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | DEL_5V | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | LM3478 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LM386 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MC33269 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCCSK54B-LTP | Diode_SMD:D_SMB | D1 |
| 1 | Micro | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | MK1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J10 |
| 1 | PCM1804 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U4 |
| 1 | Pile | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Sortie_alim | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J9 |
| 1 | TS3480CX33RFG | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | Test_10V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Test_3V3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Test_5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
More from EricGingras/Ecou-Terre
2- 4 layers92 × 86 mm

- 4 layers11.2 × 18.3 mm

Similar boards
- 4 layers190 × 135 mm

- 2 layers57.9 × 22.8 mm

Starlink apo pcb
Aces-Electronics/ae-starlink-apo-dcdc
A Starlink Mini DC-DC converter PCB for use with vehicles that have smart alernators
32 parts1MIT - 2 layers28.4 × 41.7 mm

BinaryClock
JaredWright/BinaryClock
A fully custom wall-mounted binary clock for the AIS Denver office
20 parts - 4 layers45.6 × 131 mm

Pd booster-16amps
mikegoelzer/Homebrew-ECP5-SBC
Kicad files for homebrew hobbyist computer with custom RISC-V CPU
82 parts - 2 layers71 × 54.8 mm

- 2 layers140 × 72.5 mm

Nixie proj
dm2lct/Nixieclock_kit
This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.
119 parts9GPL-3.0 - 2 layers90 × 55 mm

- 2 layers154 × 54 mm

Questions
How big is the Ecout Terre PCB V2 PCB?
It measures 92.3 × 72.5 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Ecout Terre PCB V2 use?
131 parts, built around the OPA1656ID, LM3478MA, LM386 and PCM1804DB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ecout Terre PCB V2 KiCad files?
From the EricGingras/Ecou-Terre repository on GitHub, at the commit this page was made from: the board is Fichier_PCB/Ecout-Terre_PCB_V2/Ecout-Terre_PCB_V2.kicad_pcb and its schematic Fichier_PCB/Amplificateur_micro_V1/Amplificateur_micro_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ecout Terre PCB V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask EricGingras before reusing the design.