4 layers170 × 100 mm
2 layers41 × 60.5 mm
DMXShield
Erebos3D/DMX-DipA Dip for NTCs C.H.I.P to control lights etc
- Size
- 41 × 60.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 114
- Pads
- 231
- Tracks, vias
- 371, 27
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Aug 2016
- Updated
- 2 Sep 2016
Overview
DMXShield is an open-source printed circuit board by Erebos3D, from the Erebos3D/DMX-Dip repository on GitHub. It is a 2-layer board of 41 × 60.5 mm with 42 parts on 114 nets, routed with 371 tracks and 27 vias.
It is built around the ATMEGA328P-AU, DS2431P+ and JUMPER3. Its parts include 9 resistors, 7 capacitors, 6 ICs, 3 transistors and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DS2431P+
TSOC-6-40℃~+85℃ 10ms 1Kbit 2.8V~5.25V 200,000 Cycles 40 Years Noise suppression function、Page write protection function Single-bus TSOC-6 EEPROM ROHSMaxim Integrated (Analog Devices)EEPROMJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mdDMX-Dip
A Dip for NTCs C.H.I.P to control lights, leds and more.
Have a look at the ongoing development of version 1.0 here.
The files are for KiCad, not EAGLE.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitors_SMD:C_0805 | C5, C6, C7 |
| 3 | 470 | Resistors_SMD:R_0805 | R7, R8, R9 |
| 3 | 4K7 | Resistors_SMD:R_0805 | R4, R5, R6 |
| 3 | 6N136 | MyLib1:DIP-8_SMD | U1, U2, U3 |
| 3 | Q_NMOS_GDS | MyLib1:IRLU_THT_Upstanding | Q1, Q2, Q3 |
| 2 | 10u | Capacitors_ThroughHole:C_Radial_D5_L11_P2.5 | C1, C2 |
| 2 | 220 | Resistors_SMD:R_0805 | R1, R2 |
| 2 | 22pF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C3, C4 |
| 2 | 510 | Resistors_SMD:R_1206 | RDMX1, RDMX3 |
| 2 | CONN_02X20 | Pin_Headers:Pin_Header_Straight_2x20 | U13, U14 |
| 2 | LED | LEDs:LED-5MM | INFO1, PWR1 |
| 2 | SW_PUSH | MyLib1:SWITCH_SMALL | BT1, RESET1 |
| 1 | 01X04 | Pin_Headers:Pin_Header_Straight_1x04 | CNLED1 |
| 1 | 10K | Resistors_SMD:R_0805 | R3 |
| 1 | 130 | Resistors_SMD:R_1206_HandSoldering | RDMX2 |
| 1 | AM1S_0505SZ | Converters_DCDC_ACDC:DCDC-Conv_TRACO_TME05xx_TME12xx | DC1 |
| 1 | ATMEGA328P-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | ISP1 |
| 1 | CONN_PWR12V | MyLib1:BARREL_JACK_Silk | CN12 |
| 1 | Crystal | Crystals:Crystal_HC49-U_Vertical | CLK1 |
| 1 | DS2431 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | M1 |
| 1 | JUMPER3 | MyLib1:Solder_Jumper_3 | SJP1 |
| 1 | LOGO | MyLib1:logo_footprint | G*** |
| 1 | MAX481CPA | SMD_Packages:SOIC-8-N | ICMAX1 |
| 1 | XLR3 | MyLib1:XLR_Angled_Silk | K1 |
Similar boards
- 4 layers300 × 150 mm
Selftest bd
FirstTestStation/Selftest_Board
KiCad PCB design utilized in the creation of the Selftest Board.
508 partsCERN-OHL-W-2.0 - 2 layers40.9 × 60.2 mm
C.H.I.P DIP
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
21 parts71 - 2 layers13.5 × 42.9 mm
- 4 layers70 × 50 mm
- 2 layers40 × 100 mm
Front prototype
vgisc/ZeroPhone-PCBs
This is gamma version. It's WIP and is going to be sent to production soon (as soon as last TODOs are finished). You can already order this board, but it's possible the I2C GPIO expander pin mapping is going to change.
87 parts1GPL-3.0 - 2 layers76.2 × 76.2 mm
- 2 layers50 × 50 mm
Questions
How big is the DMXShield PCB?
It measures 41 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DMXShield use?
42 parts, built around the ATMEGA328P-AU, DS2431P+ and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DMXShield KiCad files?
From the Erebos3D/DMX-Dip repository on GitHub, at the commit this page was made from: the board is DMXShield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DMXShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask Erebos3D before reusing the design.