Skip to the content
4 layers105 × 35 mmElec3300, the printed circuit board in 3D

A FOC driver board for multiple BLDC motors

Size
105 × 35 mm
Copper layers
4
Thickness
1.6 mm
Parts
67
Nets
87
Pads
325
Tracks, vias
270, 314
Pours
25
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Feb 2026
Updated
12 Feb 2026

Overview

Elec3300 is an open-source printed circuit board by Enderscheng, from the Enderscheng/DRV8313_simplefoc_PCB repository on GitHub. It is a 4-layer board of 105 × 35 mm with 67 parts on 87 nets, routed with 270 tracks and 314 vias.

It is built around the DRV8313PWP, LMR36015SFBRNXR and 01000057Z, with the XT60-M among its other parts. Its parts include 30 capacitors, 10 ICs, 10 connectors, 7 resistors and 4 diodes. It belongs with the robots and motor control boards of this library.

Main components

4

README

README.md

DRV8313_simplefoc_PCB

A FOC driver board for controlling multiple BLDC motors using SimpleFOC and the DRV8313 3‑phase driver.

  • Project: FOC Motor Driver PCB
  • Driver IC: Texas Instruments DRV8313
  • Firmware ecosystem: Arduino and SimpleFOC library

Table of Contents


Overview

DRV8313_simplefoc_PCB is a compact motor driver board intended for Field Oriented Control (FOC) of BLDC motors. The board is designed to be used with a microcontroller running SimpleFOC, and provides the power stage based on the DRV8313.

Goal: make it easy to build multi-motor setups by repeating the same driver channel design and keeping wiring/bring-up straightforward.


Features

  • DRV8313-based 3-phase BLDC driver stage
  • Designed for SimpleFOC compatibility
  • Multi-motor oriented layout (repeatable channels)
  • Test points / headers for bring-up (PWM, enable, faults, power) (edit to match your PCB)
  • Power input + motor phase outputs (edit to match your PCB)

Repository Structure

Adjust folder names to match your repo.

  • Hardware/ – schematics, PCB layout, fabrication outputs (Gerbers)
  • BOM/ – BOM files, part numbers, assembly notes
  • Docs/ – wiring diagrams, photos, notes

Hardware (PCB)

Driver: DRV8313 (3 half-bridges, BLDC driver)

Key specs (fill these in)

  • Supply voltage: 12 V
  • Max phase current (design target): 3 A
  • PWM input: 3 PWM
  • Control interface: STM32

Photos / renders

Add images like this (put your images in Docs/ or use GitHub uploads):

PCB render
Assembled board


Bill of Materials (BOM)

List critical parts (example layout below):

  1. DRV8313 – 3-phase driver IC
  2. ASC712 – Hall-effect current sensor
  3. LMR36015S – synchronous step-down buck converter
  4. Connectors
    • Power input (VIN/GND)
    • Motor outputs (U/V/W)
    • Control header (PWM/EN/GND/FAULT, etc.)
    • current sense output

Parts

67
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0402_1005MetricC12, C20, C21, C22, C24, C26, C27, C32, C34, C35
61nCapacitor_SMD:C_0402_1005MetricC1, C2, C29, C30, C37, C38
6ACS712xLCTR-05BPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U2, U9, U10, U12, U13
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3100uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3, C28, C36
310nCapacitor_SMD:C_0402_1005MetricC23, C25, C33
31k5Resistor_SMD:R_0402_1005MetricR2, R5, R6
3220nCapacitor_SMD:C_0402_1005MetricC8, C19, C31
3Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3, J9, J12
3Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J10, J13
3Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4, J8, J11
3DRV8313PWPfoot_lib:PWP0028F_LU3, U8, U11
3LEDDiode_SMD:D_0603_1608MetricD2, D3, D4
222nCapacitor_SMD:C_0402_1005MetricC10, C11
101000057Zfoot_lib:FUSE_01000057ZF1
1100kResistor_SMD:R_0402_1005MetricR3
110uInductor_SMD:L_0805_2012MetricL2
11uCapacitor_SMD:C_0402_1005MetricC15
12.2uCapacitor_SMD:C_0805_2012MetricC9
120kResistor_SMD:R_0402_1005MetricR4
122uCapacitor_SMD:C_0805_2012MetricC14
1250Resistor_SMD:R_0402_1005MetricR1
14.7kResistor_SMD:R_0402_1005MetricR18
1LEDLED_SMD:LED_0603_1608MetricD1
1LMR36015SFBRNXReasyeda:VQFN-12_L3.0-W2.0-P0.65-BL_TI_RNXU4
1XT60-Mfoot_lib:AMASS_XT60-MJ2

Similar boards

  • 2 layers55 × 54 mmCarte Major Tom, the printed circuit board in 3D

    Carte Major Tom

    pollen-robotics/Orbita_3d_R1

    All you need to make your own Orbita_3d Joint!

    78 parts18
  • 4 layers35 × 35 mmFoc8313, the printed circuit board in 3D

    Foc8313

    williamhaarhoff/foc8313

    Highly compact field oriented controller based on the DRV8313 IC

    155 parts9
  • 2 layers50 × 40 mmBldc controller, the printed circuit board in 3D

    Bldc controller

    nerdmaennchen/motorcontroller-hw

    An open hardware PCB to control motors with (BLDC and DC)

    67 parts6MIT
  • 2 layers32.3 × 87.6 mmESP32-Gimbal, the printed circuit board in 3D

    ESP32-Gimbal

    Visaging/ESP32-Gimbal

    A high-performance, open-source 3-axis smartphone gimbal built from scratch using a custom PCB and the SimpleFOC library. It features real-time stabilization, native USB-C programming, and custom motion modes.

    60 parts4MIT
  • 4 layers37.1 × 41 mmServoLess, the printed circuit board in 3D

    ServoLess

    Aiano/ServoLess

    Wireless and brushless DC Servo.

    98 parts2
  • 2 layers142.5 × 99 mmPCB Prrojects, the printed circuit board in 3D

    PCB Prrojects

    PipistarXu/stm32g431-lm2596-board

    24 parts1MIT
  • 2 layers24.1 × 4.9 mmL103 CANUSB DRV8313, the printed circuit board in 3D

    L103 CANUSB DRV8313

    bjthemost-hub/l103-drv8313-as5600

    Joint motor driver: CH32L103 + DRV8313 + AS5600. KiCad hardware, FOC firmware, PC tools, 2-stage planetary gearbox (J, 25:1). MIT.

    92 partsMIT

Questions

How big is the Elec3300 PCB?

It measures 105 × 35 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Elec3300 use?

67 parts, built around the DRV8313PWP, LMR36015SFBRNXR, 01000057Z and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Elec3300 KiCad files?

From the Enderscheng/DRV8313_simplefoc_PCB repository on GitHub, at the commit this page was made from: the board is Hardware/elec3300.kicad_pcb and its schematic Hardware/elec3300.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Elec3300 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Enderscheng before reusing the design.