2 layers64.8 × 80.6 mm
PCB-4-In A Row ARCHIVE
Electro707/PCB-4-In-A-Row-ARCHIVE
This project is a PCB with an STM32 designed to be used as a Connect-4 game
89 parts1MIT
2 layers72.1 × 79.8 mm
PCB-4-In A Row ARCHIVE
Electro707/PCB-4-In-A-Row-ARCHIVE1This project is a PCB with an STM32 designed to be used as a Connect-4 game
- Size
- 72.1 × 79.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 98
- Pads
- 386
- Tracks, vias
- 924, 92
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Nov 2019
- Updated
- 17 Mar 2021
Overview
PCB-4-In A Row ARCHIVE is an open-source printed circuit board by Electro707, from the Electro707/PCB-4-In-A-Row-ARCHIVE repository on GitHub, published under the MIT licence. It is a 2-layer board of 72.1 × 79.8 mm with 100 parts on 98 nets, routed with 924 tracks and 92 vias.
It is built around the AMS1117-3.3. Its parts include 43 diodes, 30 resistors, 10 switches, 6 transistors and 4 connectors. It belongs with the STM32 boards of this library.
Main components
1README
README.mdPCB Digital 4-In-A-Row - ARCHIVED
This a PCB is a soldering kit for a 4-In-A-Row game. This specific repo is archived. Previously I didn't use a version manager, and thus I have difference folders for different revs, while now I want to start using git as a version manager (as well as proper releases and stuff). Thus there is a new clean repo for this project, and this is here for archival purposes.
The new repo can be found here: https://github.com/Electro707/PCB-4-In-A-Row
Rev A1:
Rev A2:
Latest Rev:
Authors
- Jamal Bouajjaj
License
See the LICENSE.md file for details
Changelog
What are those version? Well I have documented them under CHANGELOG.md.
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | LED_RCGB | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +27 |
| 24 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R25, R27 +8 |
| 9 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | 50 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22, R23, R24, R26, R29, R30 |
| 4 | 3.2mm Mounting Hole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Power-DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Power-Vcc | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | STM32F103RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_SPST | Button_Switch_THT:SW_CuK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J2 |
More from Electro707/PCB-4-In-A-Row-ARCHIVE
2- 2 layers66 × 73.7 mm
Driver PCB
Electro707/PCB-4-In-A-Row-ARCHIVE
This project is a PCB with an STM32 designed to be used as a Connect-4 game
46 parts1MIT
Similar boards
- 2 layers290.1 × 130 mm
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the PCB-4-In A Row ARCHIVE PCB?
It measures 72.1 × 79.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB-4-In A Row ARCHIVE use?
100 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB-4-In A Row ARCHIVE KiCad files?
From the Electro707/PCB-4-In-A-Row-ARCHIVE repository on GitHub, at the commit this page was made from: the board is Rev_A/Rev_A2/PCB/PCB.kicad_pcb and its schematic Rev_B/Rev_B/Driver PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB-4-In A Row ARCHIVE design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).