
OpenWatts
ikonis/OpenWatts
OpenWatts is a crank-mounted, single-sided cycling power meter built around an ESP32-C3. A bonded strain-gauge bridge and HX711 measure crank torque, while an LSM6DS3 IMU provides cadence and motion wake.

This is an ESP32-C3 based on the MINI-1
ESP32-C3 True S is an open-source printed circuit board by EObianom, from the EObianom/ESP32-C3_True-S repository on GitHub. It is a 2-layer board of 22.3 × 25.1 mm with 24 parts on 42 nets, routed with 247 tracks and 50 vias.
It is built around the ESP32-C3-MINI-1 and ME6211C33M5G-N. Its parts include 10 resistors, 5 capacitors, 3 connectors, 2 ICs and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.
This is an ESP32-C3 Development Board is based on the MINI-1
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C13, C16 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | ESP32-C3-MINI-1 | Espressif:ESP32-C3-MINI-1 | U3 |
| 1 | ME6211C33M5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |

ikonis/OpenWatts
OpenWatts is a crank-mounted, single-sided cycling power meter built around an ESP32-C3. A bonded strain-gauge bridge and HX711 measure crank torque, while an LSM6DS3 IMU provides cadence and motion wake.

bjkayani/PCB-Reflow-Hot-Plate
The PCB Reflow Hot Plate is a temperature controlled 120 x 70 mm hot plate designed to reflow solder SMD circuit boards.




gcormier/esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources


TobleMiner/blinkekatze
Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays
It measures 22.3 × 25.1 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ESP32-C3-MINI-1 and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EObianom/ESP32-C3_True-S repository on GitHub, at the commit this page was made from: the board is ESP32-C3_True-S.kicad_pcb and its schematic ESP32-C3_True-S.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EObianom before reusing the design.