

EncoderDaughterboard
A portable digital audio workstation and synthesizer
- Size
- 54 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 68
- Pads
- 231
- Tracks, vias
- 455, 81
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Sep 2023
- Updated
- 25 Oct 2023
Overview
EncoderDaughterboard is an open-source printed circuit board by DylanFranz, from the DylanFranz/Teensy-Synth repository on GitHub. It is a 2-layer board of 54 × 54 mm with 50 parts on 68 nets, routed with 455 tracks and 81 vias.
It is built around the RP2040, TMC6300-LA and TPS61230DRC, with the W25Q128JVSIQ and TPS2041BD among its other parts. Its parts include 26 capacitors, 11 resistors, 6 ICs, 5 connectors and 1 inductor. It belongs with the audio and music boards and the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)TMC6300-LA
QFN-20(3x3)-40℃~+125℃ 2A 2A 2V~5.25V 3 30nA Interleaved conduction protection Three Phase Yes QFN-20(3x3) Brushless DC (BLDC) Motor Driver ROHSTRINAMIC Motion Control GmbHBrushless DC (BLDC) Motor DriverTPS61230DRC
VSON-10-EP(3x3)-40℃~+125℃ 1 2.3V~5.5V 2.5V~5.5V 2MHz 4A 60uA Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHTPS2041BD
SOIC-8欠压锁定、集成电荷泵、Overcurrent Protection、Over temperature protection、Short-Circuit Protection、反向电流阻断 SOIC-8 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
README
README.mdTeensy-Synth
A portable digital audio workstation and synthesizer
A project by Dylan Franz and Val Revankar
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C8, C9, C10, C11, C12 |
| 6 | 22uf | Capacitor_SMD:C_0402_1005Metric | C18, C19, C21, C22, C23, C26 |
| 4 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C16, C17, C24, C25 |
| 2 | 10uf | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1uf | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 27pf | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | JST-SH-4 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J1, J4 |
| 1 | 1.0uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 10nf | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 12MHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 402k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | C_Small | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | Conn_01x03 | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J5 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RP2040 | RP2040D:QFN40P700X700X90-57N | U1 |
| 1 | RST | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Horizontal | J3 |
| 1 | Rsense | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | TMC6300 | footprints:QFN20_3x3_TRI | U4 |
| 1 | TPS2041B | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | TPS61230DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U5 |
| 1 | USB_BOOT | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Horizontal | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
More from DylanFranz/Teensy-Synth
1- 2 layers30 × 108 mm

Similar boards
- 4 layers39 × 80 mm

Flight computer
rice-eclipse/flight-computer
Custom STM32-Based flight computer to gather data from IMUs, altimeters, and GPS, and control in-flight pyrotechnic events.
153 parts2 - 4 layers68.6 × 56 mm

Cartridge
coco-chameleon/chameleon-hardware
TRS-80 Color Computer cartridge emulator
95 partsCERN-OHL-W-2.0 - 4 layers152.4 × 76.2 mm

Motherboard
mikegoelzer/Homebrew-ECP5-SBC
Kicad files for homebrew hobbyist computer with custom RISC-V CPU
160 parts - 2 layers80 × 80 mm

- 4 layers43.6 × 32.9 mm

Wii reg
Gmanmodz/RVL-Power-Management-System
A complete battery management and custom regulator system for a Wii portable
94 parts77 - 2 layers112.6 × 42.6 mm

- 2 layers118 × 67 mm

Coloryr
Coloryr/ColorAudio
通用耳放,目前支持: - 音乐播放 - MP3音频解码,信息显示 - FLAC音频解码,信息显示 - 蓝牙音频播放 - SBC编码 - AAC编码 - aptx编码(freeaptx解码库) - USB音频播放 - UAC1 (最大96K 32bit,只能设置一种采样大小) - UAV2 (最大192K 32bit,支持多种采样大小)
241 parts2GPL-3.0 - 2 layers41 × 33 mm

Flowsense charger
n0skill/SolarCharger
A wide(r) voltage and current range solar panel LiPo Charger
38 parts1
Questions
How big is the EncoderDaughterboard PCB?
It measures 54 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EncoderDaughterboard use?
50 parts, built around the RP2040, TMC6300-LA, TPS61230DRC and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EncoderDaughterboard KiCad files?
From the DylanFranz/Teensy-Synth repository on GitHub, at the commit this page was made from: the board is EncoderDaughterboard/EncoderDaughterboard/EncoderDaughterboard.kicad_pcb and its schematic Audio&PowerDaughterboard/Audio&Power DB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EncoderDaughterboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask DylanFranz before reusing the design.