4 layers43.6 × 32.9 mm
RVL PMS HW2
Gmanmodz/RVL-Power-Management-System
A complete battery management and custom regulator system for a Wii portable
92 parts77
4 layers43.6 × 32.9 mm
A complete battery management and custom regulator system for a Wii portable
- Size
- 43.6 × 32.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 74
- Pads
- 329
- Tracks, vias
- 365, 108
- Pours
- 35
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Mar 2019
- Updated
- 28 Nov 2020
Overview
Wii reg is an open-source printed circuit board by Gmanmodz, from the Gmanmodz/RVL-Power-Management-System repository on GitHub. It is a 4-layer board of 43.6 × 32.9 mm with 94 parts on 74 nets, routed with 365 tracks and 108 vias.
It is built around the PIC16F15324-I/P, TLV62095RGT and TPS61230DRC, with the BQ25895MRTW among its other parts. Its parts include 29 capacitors, 19 resistors, 12 connectors, 7 ICs and 6 inductors. It belongs with the power boards and the PIC boards of this library.
Main components
4
PIC16F15324-I/P
PDIP-14-40℃~+85℃ 10bit 12 2.3V~5.5V 32MHz 512Byte 5bit 7KB 8 Bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TLV62095RGT
VQFN-16-EP(3x3)-40℃~+125℃@(TJ) 1 1.4MHz 2.5V~5.5V 20uA 4A 800mV~5.5V Adjustable Buck Buck Built-in Yes VQFN-16-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TPS61230DRC
VSON-10-EP(3x3)-40℃~+125℃ 1 2.3V~5.5V 2.5V~5.5V 2MHz 4A 60uA Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
BQ25895MRTW
WQFN-24-EP(4x4)-40℃~+85℃ 1 12uA 2.15V 3.9V~14V 4.608V 5A Charging IC I2C Lithium Battery Not supported Support WQFN-24-EP(4x4) Battery Management ROHSTexas InstrumentsBattery Management
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | C | Capacitors_SMD:C_0805 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C19, C20, C21, C25, C26, C27, C28 +6 |
| 19 | R | Resistors_SMD:R_0603 | R1, R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 +3 |
| 13 | TEST_1P | .pretty:TP2 | 1v, 1v8, 1v15, 3v3, 5v, B+, CHRG, GND, GND, GND, GND, GND, GND |
| 11 | TEST_1P | .pretty:TP1 | J4, J5, J8, J11, J12, J14, J16, J17, J18, J24, J26 |
| 6 | C | Capacitors_SMD:C_0603 | C8, C9, C17, C18, C23, C24 |
| 5 | L | Inductors_SMD:L_Taiyo-Yuden_MD-4040 | L1, L2, L3, L4, L5 |
| 4 | tlv62095 | Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm_ThermalVias | U1, U2, U4, U5 |
| 3 | 2N3904 | .pretty:SOT-23_custom | Q1, Q2, Q3 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch1.27mm | J25 |
| 1 | L | .pretty:ASPI-0630HI-2R2M-T15 | L6 |
| 1 | MountingHole_2.2mm_M2 | Mounting_Holes:MountingHole_2.2mm_M2 | wREF** |
| 1 | PIC16F15324 | Housings_DFN_QFN:UQFN-16-1EP_4x4mm_Pitch0.65mm | U6 |
| 1 | R_Pack04 | .pretty:RA_0804 | RN1 |
| 1 | TPS61230 | Housings_SON:VSON-10-1EP_3x3mm_Pitch0.5mm_ThermalPad | U3 |
| 1 | bq25895m | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U7 |
The 91 most common of 94 parts.
More from Gmanmodz/RVL-Power-Management-System
2- 2 layers9.7 × 6.3 mm
RGB LED pcb
Gmanmodz/RVL-Power-Management-System
A complete battery management and custom regulator system for a Wii portable
6 parts77
Similar boards
- 2 layers28.8 × 19.4 mm
UniAmp
Gmanmodz/U-AMP
Application program for LM49450 in C with PIC16LF15324. Digital audio configuration for Wii, PS2, and Dreamcast as well as analog audio input depending on jumper selection
47 parts27 - 4 layers102 × 100 mm
Zelvicka
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
214 parts12 - 4 layers495.6 × 88.6 mm
ZakladniElektronika
TVavrinec/AHS-Automaticke_Herni_Stanoviste
Elektronika je rozdělena na dvě desky, Led dsku a Hlavní desku.
378 parts - 2 layers30.5 × 16.5 mm
Tymkrs Cyphercon 2020 IRhack
Wireb/Cyphercon-5_3-2022
Files related to the Cyphercon 5.3 2022 badges and support equipment.
17 parts4MIT - 2 layers112.6 × 42.6 mm
- 2 layers118 × 67 mm
Coloryr
Coloryr/ColorAudio
通用耳放，目前支持： - 音乐播放 - MP3音频解码，信息显示 - FLAC音频解码，信息显示 - 蓝牙音频播放 - SBC编码 - AAC编码 - aptx编码(freeaptx解码库) - USB音频播放 - UAC1 (最大96K 32bit，只能设置一种采样大小) - UAV2 (最大192K 32bit，支持多种采样大小)
241 parts2GPL-3.0 - 2 layers54 × 54 mm
EncoderDaughterboard
DylanFranz/Teensy-Synth
A portable digital audio workstation and synthesizer
50 parts2 - 4 layers39 × 80 mm
Flight computer
rice-eclipse/flight-computer
Custom STM32-Based flight computer to gather data from IMUs, altimeters, and GPS, and control in-flight pyrotechnic events.
153 parts2
Questions
How big is the Wii reg PCB?
It measures 43.6 × 32.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Wii reg use?
94 parts, built around the PIC16F15324-I/P, TLV62095RGT, TPS61230DRC and BQ25895MRTW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wii reg KiCad files?
From the Gmanmodz/RVL-Power-Management-System repository on GitHub, at the commit this page was made from: the board is RVLPMS (OLD)/WiiPMS KiCAD files/Wii reg.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wii reg design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gmanmodz before reusing the design.