Skip to the content
2 layers114.7 × 86.2 mmProject 2 PCB, the printed circuit board in 3D

Micro controller: Raspberry Pi Pico GPS: Adafruit Mini GPS PA1010D Radio: HC05 IMU: Adafruit BNO055 SD Card: HW-125 SPI Micro SD Board Battery: LP103454

Size
114.7 × 86.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
57
Pads
157
Tracks, vias
100, 3
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 Oct 2022
Updated
30 Nov 2022

Overview

Project 2 PCB is an open-source printed circuit board by Dygore, from the Dygore/4013_Project2_Group2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 114.7 × 86.2 mm with 22 parts on 57 nets, routed with 100 tracks and 3 vias.

It is built around the HC-05 and BNO055. Its parts include 5 ICs, 4 resistors, 4 diodes, 2 connectors and 1 transistor. It belongs with the RP2040 boards of this library.

Main components

2

README

README.md

ECEN 4013 Project 2 Group 2

About

This project is for Group 2's ECEN 4013 project 2, all of the code contained will be documented and cited if needed. The goal of this project is to create a circuit that can transmit IMU and GPS data through 3 means of communication (USB, UHF RF, and SD Card). This Github project will be used to store all of the code architecture, the details of the project are still being finalized and will be updated soon!

Details

The current plan is to have two seperate circuits based on difficulty. The first circuit will be the main focus with the details contained below, the second circuit details have not been finalized yet.

Micro controller: Raspberry Pi Pico
GPS: Adafruit Mini GPS PA1010D
Radio: HC05
IMU: Adafruit BNO055
SD Card: HW-125 SPI Micro SD Board
Battery: LP103454

References

-https://microcontrollerslab.com/neo-6m-gps-module-raspberry-pi-pico-micropython/

Dylan Gore 10/24/2022

Parts

22
QtyValueFootprintReferences
3MountingHoleMountingHole:MountingHole_4.3mm_M4_Pad_TopBottomH1, H2, H3
2D_SchottkyDiode_SMD:D_1206_3216MetricD1, D2
1180Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
12N3904Package_TO_SOT_SMD:SOT-23Q1
160Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1800Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1BNO055MCU_RaspberryPi_and_Boards:BNO055U3
1BatteryConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ1
1BuzzerKiCad:CMT8585397SMTTRBZ1
1Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1GT-U7MCU_RaspberryPi_and_Boards:GT-U7U4
1GreenLED_THT:LED_D5.0mmD3
1HC-05MCU_RaspberryPi_and_Boards:HC-05U5
1HW-125MCU_RaspberryPi_and_Boards:HW-125U1
1LOGOLOGOG***
1PicoMCU_RaspberryPi_and_Boards:RPi_Pico_SMD_THU2
1RedLED_THT:LED_D5.0mmD4
1SW_ReedResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalSW1

Similar boards

  • 4 layers126.6 × 37.7 mmGruzik2.0, the printed circuit board in 3D

    Gruzik2.0

    NYDEREK/LineFollower_GRUZIK2.0-light

    GRUZIK2.0 is simple light construction made for "line follower light" competition

    50 parts101MIT
  • 2 layers100 × 100 mmMain board V2, the printed circuit board in 3D

    Main board V2

    Resaj/cyclops-project

    Robot de carreras open source con cámara

    31 parts53
  • 2 layers90.9 × 38.4 mmSnaaur v1, the printed circuit board in 3D

    Snaaur v1

    duongngochoan/Self_balancing_robot_PID

    Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.

    58 parts7
  • 2 layers56.8 × 68.6 mmEmg, the printed circuit board in 3D

    Emg

    leikoilja/muscle-imbalance-detection

    A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.

    84 parts6MIT
  • 2 layers135.8 × 56.1 mmPower board, the printed circuit board in 3D

    Power board

    xtarke/automated_buggy

    This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.

    87 parts5GPL-3.0
  • 2 layers33 × 58.8 mmFusion, the printed circuit board in 3D

    Fusion

    chungyu710/Fusion

    Capstone Design Project

    36 parts4
  • 4 layers160 × 117.5 mmDaveecu2, the printed circuit board in 3D

    Daveecu2

    miata-bot/daveecu2

    Speeduino Mainboard designed for NA Maita chassis

    249 parts3
  • 2 layersUltransonicHumidifier, the printed circuit board in 3D

    UltransonicHumidifier

    anuj-dangi/iot-and-automation

    Repo for IOT and automation projects

    19 parts2

Questions

How big is the Project 2 PCB PCB?

It measures 114.7 × 86.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Project 2 PCB use?

22 parts, built around the HC-05 and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project 2 PCB KiCad files?

From the Dygore/4013_Project2_Group2 repository on GitHub, at the commit this page was made from: the board is PCB/Project_2_PCB.kicad_pcb and its schematic PCB/Project_2_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project 2 PCB design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).