

Heartbeat
- Size
- 64.5 × 27.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 19
- Pads
- 68
- Tracks, vias
- 83, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2021
- Updated
- 12 Jan 2023
Overview
Heartbeat is an open-source printed circuit board by Dressner95, from the Dressner95/Heartbeat-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 64.5 × 27.5 mm with 25 parts on 19 nets, routed with 83 tracks and 18 vias.
It is built around the ATTINY85-20SU, AM2520ZGC09 and BSS138. Its parts include 7 resistors, 7 diodes, 5 capacitors, 3 ICs and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AM2520ZGC09
SMD,2.5x2mm-40℃~+85℃ 1.9mm round lamp head 102.5mW 20mA 20° 3.3V 3cd 515nm 525nm Discrete Diode Emerald Green Water Clear SMD,2.5x2mm LED Indication - Discrete ROHSKingbrightLED Indication - DiscreteBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdHeartbeat-PCB
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5, D7 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C1, C5 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 22 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 3.3M | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 4.7uf | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ADPS-9008 | APDS-9008-020:LCC140P200X240X80-6 | U2 |
| 1 | AM2520ZGC09 | AM2520ZGC09:AM2520ZGC09 | D1 |
| 1 | ATTINY85-20SU | digikey-footprints:SOIC-8_W5.3mm | U1 |
| 1 | BSS138 | digikey-footprints:SOT-23-3 | Q1 |
| 1 | D_Schottky | Diode_SMD:D_0805_2012Metric | D6 |
| 1 | Holder | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | SW_DPST | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
Similar boards
- 2 layers120 × 40 mm

- 2 layers65 × 56.5 mm

SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 2 layers18.8 × 8.1 mm

Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm

- 2 layers43.9 × 29 mm

C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm

- 2 layers200 × 100 mm

Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm

Questions
How big is the Heartbeat PCB?
It measures 64.5 × 27.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Heartbeat use?
25 parts, built around the ATTINY85-20SU, AM2520ZGC09 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Heartbeat KiCad files?
From the Dressner95/Heartbeat-PCB repository on GitHub, at the commit this page was made from: the board is Hardware-Old/Heartbeat.kicad_pcb and its schematic Hardware/HeartBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Heartbeat design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).