
Rom
Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Скомпилированный учебник и gerber-файлы для изготовления плат:
Adder is an open-source printed circuit board by Dovgalyuk, from the Dovgalyuk/RelayComputerKit repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 120 × 109.5 mm with 26 parts on 72 nets, routed with 375 tracks and 0 vias.
Its parts include 10 connectors, 8 diodes and 8 switches.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | 4PDT | relay:MY4N socket | K1, K2, K3, K4, K5, K6, K7, K8 |
| 1 | CY/~CY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | CY_OUT | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J11 |
| 1 | IN1 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J1 |
| 1 | IN1 | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J5 |
| 1 | IN2 | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J7 |
| 1 | IN2 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J2 |
| 1 | OUT | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | J3 |
| 1 | OUT | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J6 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J8 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | J9 |

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

google/walt
A device for measuring latency of physical sensors and outputs on phones and computers

It measures 120 × 109.5 mm and has 2 copper layers, 1.6 mm thick.
26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dovgalyuk/RelayComputerKit repository on GitHub, at the commit this page was made from: the board is modules/adder/adder.kicad_pcb and its schematic labs/schemes/operations/add.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).