
Rom
Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Скомпилированный учебник и gerber-файлы для изготовления плат:
Switches is an open-source printed circuit board by Dovgalyuk, from the Dovgalyuk/RelayComputerKit repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 42.5 × 52 mm with 7 parts on 16 nets, routed with 38 tracks and 0 vias.
Its parts include 4 switches and 3 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_SPDT | relay:MTS-102 | SW1, SW2, SW3, SW4 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | J1 |
| 1 | ~ | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J2 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J3 |

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

Dovgalyuk/RelayComputerKit
Скомпилированный учебник и gerber-файлы для изготовления плат:

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 42.5 × 52 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dovgalyuk/RelayComputerKit repository on GitHub, at the commit this page was made from: the board is modules/switches/switches.kicad_pcb and its schematic labs/schemes/operations/add.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).