
Unni smartification c6-10.99-constraints
lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices

Custom ESP32 PWM motor controller designed in KiCad
PWM Motor control board is an open-source printed circuit board by DiyaVPatil, from the DiyaVPatil/PWM-Motor-Control-ESP32 repository on GitHub. It is a 2-layer board of 67.5 × 90.5 mm with 34 parts on 46 nets, routed with 202 tracks and 0 vias.
It is built around the TPS63031DSK, AO3400A and SS14. Its parts include 10 capacitors, 8 resistors, 5 connectors, 4 diodes and 4 transistors. It belongs with the robots and motor control boards of this library.
A custom PCB-based motor controller designed in KiCad for efficient PWM speed control of brushed DC motors using an ESP32 microcontroller.
This project began as a perfboard prototype and was later redesigned as a custom printed circuit board to improve physical dimensions and manufacturability.
Perfboard prototype built from KiCad schematic as a "proof-of-concept"
Final custom KiCad PCB, after making improvements from the perfboard prototype.
Note that there is a functionality video available under images and BOM
ESP32-PWM-Motor-Controller/
firmware/
hardware/
kicad/
images and BOM/
docs/
README.mdDiya
Electrical Engineering Student
University of California, Riverside
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 4 | -ve | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-2-2,5-V-SMD_1x02-1MP_P2.50mm_Vertical | J1, J2, J3, J4 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8 |
| 4 | 220 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | SS14 | Diode_SMD:D_SMA | D1, D2, D3, D4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C9, C10 |
| 1 | 1.5uH | Inductor_SMD:L_Coilcraft_XxL4020 | L1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 680uF | Capacitor_SMD:CP_Elec_8x10.5 | C6 |
| 1 | Battery terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-2-2,5-V-SMD_1x02-1MP_P2.50mm_Vertical | J5 |
| 1 | TPS63031DSK | Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U1 |
| 1 | ~ | ESP32 Pinout:Untitled | M1 |

lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices

lukasprojects/esp32-dalitester
Small ESP32 DALI tester for commissioning and maintaining light installations via the DALI bus

windmoondreamer/pairing-voice-cube
아이가 목소리를 녹음하고, 부모가 버튼을 눌러 재생하는 장치의 회로기판 프로젝트. 80mm 큐브 케이스 · 최대 45초 녹음 · 내장 플래시 · 배터리 구동.


BoltzRnD/SmartPrintCoreH7x
STM32H7 based Robust and Open Source 3D Printer Mainboard

xtech/hw-openmower-universal
This hardware version is in beta state. Expect for things to not work at the current state!


OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
It measures 67.5 × 90.5 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the TPS63031DSK, AO3400A and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DiyaVPatil/PWM-Motor-Control-ESP32 repository on GitHub, at the commit this page was made from: the board is hardware/PWM Motor control board.kicad_pcb and its schematic hardware/PWM Motor control board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DiyaVPatil before reusing the design.