Skip to the content
2 layers141.5 × 97.5 mmCUBESAT EPS, the printed circuit board in 3D

A robust, high-reliability Electrical Power System (EPS) designed for a 1U/2U CubeSat architecture. This subsystem handles voltage regulation, dual-rail power distribution, and high-side power switching to ensure stable…

Size
141.5 × 97.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
30
Pads
59
Tracks, vias
82, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 May 2026
Updated
24 May 2026

Overview

CUBESAT EPS is an open-source printed circuit board by Dhyan-M, from the Dhyan-M/CUBESAT_PowerDistribution_DHYAN_M repository on GitHub. It is a 2-layer board of 141.5 × 97.5 mm with 14 parts on 30 nets, routed with 82 tracks and 0 vias.

It is built around the LM1117DT-3.3 and IRF540N. Its parts include 4 capacitors, 3 resistors, 2 ICs, 2 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

CUBESAT_PowerDistribution_DHYAN_M

CubeSat Electrical Power System (EPS)

A robust, high-reliability Electrical Power System (EPS) designed for a 1U/2U CubeSat architecture. This subsystem handles voltage regulation, dual-rail power distribution, and high-side power switching to ensure stable power delivery to the onboard computer (OBC) and mission payloads under varying battery conditions.


Technical Specifications & Architecture

The EPS manages power distribution by stepping down raw battery voltage into stable DC rails and utilizes logic-level switching for autonomous payload isolation.

1. Power Regulation Architecture

  • Primary 5V Rail: Handled by the LM7805 linear voltage regulator, providing a dedicated, low-ripple power source for the central microcontroller/OBC (Arduino Nano platform).
  • Secondary 3.3V Rail: Handled by the LM1117-3.3 low-dropout (LDO) linear regulator, chained to provide low-noise power for onboard sensors, communication modules, and telemetry systems.

2. High-Side Power Switching & Telemetry

  • Power Switching: Uses IRF540N N-channel Power MOSFETs configured for high-efficiency switching paths. This allows the microcontroller to dynamically cut or grant power to specific high-draw payloads to conserve battery.
  • Reverse Current & Spike Protection: Integrated 1N5822 Schottky barrier diodes guard the regulation stages against reverse-polarity transients, inductive spikes, and back-EMF from external sub-systems.

System Block Diagram

[ Raw Battery Input ] │ ├──> [ 1N5822 Protection Diode ] ──> [ LM7805 (5V Regulator) ] ──> Stable 5V Rail ──> Arduino Nano (OBC) │ │ │ └──> [ LM1117 (3.3V LDO) ] ──> Stable 3.3V Rail │ └──> [ IRF540N MOSFET Switches ] ──> Dynamic Payload Isolation Channels (Controlled by OBC GPIO)


Repository Structure

  • /CUBESAT_EPS.kicad_sch - Main schematic file mapping out electrical connections and circuit design.
  • /CUBESAT_EPS.kicad_pcb - Physical PCB layout file showing component footprints, track routing, and ground planes.
  • /CUBESAT_EPS.pdf - High-resolution, production-ready schematic print for quick design reviews.
  • /CUBESAT_EPS.csv - Bill of Materials (BOM) containing precise component values, quantities, and footprint configurations.
  • /Gerbers/ - Complete fabrication directory containing industry-standard Gerber files (.gbr) and Excellon drill files (.drl) compiled for PCB manufacturing.

Tools & Technologies Used

  • KiCad EDA (v7/v8): Used for complete Electronic Design Automation, including schematic capture, custom footprint verification, 2-layer PCB copper routing, zone fills (copper ground planes), and Design Rule Checking (DRC).
  • GitHub: Utilized for hardware version control, managing design iterations, tracking development branches, and hosting open-source documentation.
  • Markdown: Used to build clear, accessible engineering documentation for cross-functional team collaboration.

Manufacturing & Assembly Notes

  • Layers: 2-Layer Board (Top Copper F.Cu / Bottom Copper B.Cu).
  • Grounding: Optimized with extensive cross-layer copper pours connected via stitching vias to minimize return path inductance and reduce electromagnetic interference (EMI).
  • Traces: Power rails are routed with thickened traces to easily sustain maximum current limits without excessive thermal dissipation.

Parts

14
QtyValueFootprintReferences
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3
210uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3, C4
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1, J2
1100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2
11N5822Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1
1330nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1
14.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1IRF540NPackage_TO_SOT_THT:TO-220-3_VerticalQ1
1LM1117DT-3.3Package_TO_SOT_THT:TO-220-3_VerticalU2
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU1

Similar boards

  • 2 layers83.7 × 90.3 mmIncubator Quetta Client, the printed circuit board in 3D

    Incubator Quetta Client

    manhoosbilli1/Incubator_basic_esp32_modular_1_sided

    This contains an incubator pcb i've made for a client. his needs were specific so only added what he needed. a complete and complex version can be found in capibator organization.

    43 parts
  • 2 layers78 × 84 mmLC meter, the printed circuit board in 3D

    LC meter

    schuyler4/LCR_Meter

    An LCR meter design.

    93 parts6MIT
  • 2 layers55 × 55 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    Deni90/singleDigitNixieClock

    A small project that combines ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and…

    39 parts5MIT
  • 2 layers139.7 × 114.3 mmSelf balancing robot, the printed circuit board in 3D

    Self balancing robot

    K0nradG/self-balancing-robot

    Self-balancing robot powered by nRF52840 and Zephyr RTOS, with BLE control, OTA updates, and a Raspberry Pi camera interface designed for future autonomous navigation.

    36 parts4Apache-2.0
  • 2 layers99.8 × 60.2 mmIrrigation IoT, the printed circuit board in 3D

    Irrigation IoT

    VictorRavani/Irrigation_IoT

    This project covers the complete development of Hardware and Firmware for IoT-based supervisory control. It offers all the necessary information and resources so that anyone can set up the system independently.

    79 parts4MIT
  • 4 layers70 × 70 mmInverter KiCAD, the printed circuit board in 3D

    Inverter KiCAD

    AresEnsea/2425_Projet2A_AresCFR

    Ce repository GitHub regroupe l'ensemble des projets & documents réalisés par l'association Ares pour la Coupe de France de Robotique 2025

    104 parts3
  • 2 layers87.6 × 63.2 mmTip Etcher, the printed circuit board in 3D

    Tip Etcher

    KN-NaMi/Tip-Etcher

    Tip Etcher

    89 parts3
  • 4 layers100 × 40 mmVESX, the printed circuit board in 3D

    VESX

    NormalHuman-Anything/VESX

    V(ESC)ESX

    183 parts3CERN-OHL-W-2.0

Questions

How big is the CUBESAT EPS PCB?

It measures 141.5 × 97.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CUBESAT EPS use?

14 parts, built around the LM1117DT-3.3 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CUBESAT EPS KiCad files?

From the Dhyan-M/CUBESAT_PowerDistribution_DHYAN_M repository on GitHub, at the commit this page was made from: the board is CUBESAT_EPS.kicad_pcb and its schematic CUBESAT_EPS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CUBESAT EPS design in my own project?

Its repository states no licence, so its author keeps all rights: ask Dhyan-M before reusing the design.