Skip to the content
2 layers50.8 × 22.9 mmMinimain esp32-s2, the printed circuit board in 3D

PCB files for the MiniMain ESP32-S2 in an Adafruit Feather compatible format.

Size
50.8 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
54
Pads
198
Tracks, vias
422, 61
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 May 2022
Updated
8 May 2022

Overview

Minimain esp32-s2 is an open-source printed circuit board by DepartmentOfAlchemy, from the DepartmentOfAlchemy/minimain-esp32-s2 repository on GitHub. It is a 2-layer board of 50.8 × 22.9 mm with 39 parts on 54 nets, routed with 422 tracks and 61 vias.

It is built around the ESP32-S2-MINI-1-N4R2, LTV-356T and 1N4150W-HE3-08, with the USB4105-GF-A and WS2812B-2020 among its other parts. Its parts include 10 resistors, 9 capacitors, 6 connectors, 3 ICs and 3 diodes. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

MiniMain ESP32-S2

PCB files for the MiniMain ESP32-S2 in an Adafruit Feather compatible format.

Description

This Feather-shaped main board contains an ESP32-S2 for the main microcontroller. It contains 4 MB of flash + 2 MB of PSRAM along with native USB.

This board is designed for use in haunted attraction props as it includes an optoisolated input that allows it to be triggered by another prop controller operating at 12V. This is where the MiniMain deviates from a standard Adafruit Feather: it does not include support for battery operation. (There is also one additional pin broken out in standard 2.54mm pitch format designed for a servo.)

License

Inspired by Adafruit Feather ESP32-S2. Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Adafruit Feather ESP32-S2 designed by Limor Fried/Ladyada for Adafruit Industries.

MiniMain ESP32-S2 designed by Jesse Peterson/cubeinhabitant.

Creative Commons Attribution/Share-Alike

Parts

39
QtyValueFootprintReferences
410uFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C9
310KResistor_SMD:R_0603_1608MetricR2, R3, R8
31uFCapacitor_SMD:C_0603_1608MetricC6, C8, C10
25.1KResistor_SMD:R_0603_1608MetricR5, R6
2MountingHoleMountingHole:MountingHole_2.7mm_M2.5_ISO14580H2, H4
2MountingHoleMountingHole:MountingHole_2.7mm_M2.5_ISO14580_PadH1, H3
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1, SW2
10.1uFCapacitor_SMD:C_0603_1608MetricC4
1100KResistor_SMD:R_0603_1608MetricR4
110uFCapacitor_SMD:C_0402_1005MetricC7
1150Resistor_SMD:R_0603_1608MetricR12
11MegResistor_SMD:R_0603_1608MetricR10
11N4150W-HE3-08Diode_SMD:D_SOD-123D2
168Resistor_SMD:R_0603_1608MetricR7
1680Resistor_SMD:R_0603_1608MetricR11
1AP7365-33WG-7Package_TO_SOT_SMD:SOT-23-5U1
1Conn_01x02doa-footprint-library:OSTVN02A150J8
1Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ10
1Conn_01x04Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ2
1Conn_01x12doa-footprint-library:PinHeaderPlain_1x12_P2.54mm_VerticalJ5
1Conn_01x16doa-footprint-library:PinHeaderPlain_1x16_P2.54mm_VerticalJ3
1ESP32-S2-MINI-1-N4R2doa-footprint-library:ESP32S2MINI1N4R2IC1
1LOGOdoa-logo:DepartmentOfAlchemyLogoG***
1LTV-356TPackage_SO:SO-4_4.4x3.6mm_P2.54mmU2
1REDLED_SMD:LED_0603_1608MetricD3
1TestPointTestPoint:TestPoint_Pad_D1.5mmTP1
1USB4105-GF-Adoa-footprint-library:GCT_USB4105-GF-AJ1
1WS2812B-2020doa-footprint-library:WS2812B2020LED1

Similar boards

  • 2 layers43 × 43 mmIncipit11, the printed circuit board in 3D

    Incipit11

    DepartmentOfAlchemy/Incipit11

    Low power light dimmer

    39 partsMIT
  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 4 layers140.7 × 77.4 mmHexControllerV3 larger, the printed circuit board in 3D

    HexControllerV3 larger

    TH4R4V3N1324/hexapod-controller

    Embedded firmware and hardware-support code for a hexapod robot controller. The repository contains firmware for the handheld/controller interface, an ESP32 wireless receiver, ATtiny1616 left and right boards, and a…

    48 parts
  • 4 layers128.7 × 63.9 mmHexControllerV3, the printed circuit board in 3D

    HexControllerV3

    TH4R4V3N1324/Hexapod

    This repository contains the complete design, control software and documentation for a six-legged walking robot (hexapod).

    49 parts
  • 4 layers16.9 × 119.4 mmOrbit, the printed circuit board in 3D

    Orbit

    earthtojake/text-to-cad

    Design physical products with AI

    182 parts26kMIT
  • 2 layers48 × 65.5 mmOpen telegraph, the printed circuit board in 3D

    Open telegraph

    animesh-chouhan/open-telegraph

    A pocket-size Morse key. One button, one RGB LED, an ESP32-S3, and a battery. Plug it in over USB-C or pair it over Bluetooth and it types Morse into any device as a standard keyboard. Fully open, down to the copper.

    52 parts5CERN-OHL-S-2.0
  • 2 layers80.2 × 99 mmAT ProtoKeeb rev1, the printed circuit board in 3D

    AT ProtoKeeb rev1

    atechofficials/protokeeb

    Open Source 16-Key Mechanical Keyboard with rotary encoder and ARGB backlight. Powered by Raspberry Pi Pico. Supports QMK, KMK and ZMK Keyboard Firmware.

    114 parts1MIT

Questions

How big is the Minimain esp32-s2 PCB?

It measures 50.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Minimain esp32-s2 use?

39 parts, built around the ESP32-S2-MINI-1-N4R2, LTV-356T, 1N4150W-HE3-08 and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Minimain esp32-s2 KiCad files?

From the DepartmentOfAlchemy/minimain-esp32-s2 repository on GitHub, at the commit this page was made from: the board is board/MiniMain-esp32-s2/MiniMain-esp32-s2.kicad_pcb and its schematic board/MiniMain-esp32-s2/MiniMain-esp32-s2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Minimain esp32-s2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask DepartmentOfAlchemy before reusing the design.