2 layers94 × 70 mm
DCDC Buck
ykupas/DCDC-Buck-KiCAD
DC-DC buck converter KiCAD project using OpAmps to compensate and control switching. KiCAD v10 used.
63 parts1MIT
2 layers150 × 50 mm
Magic wand - electroboom
DavidBojanovic08/Magic-wandSchematic and PCB (ZVS driver for the flyback transformer)
- Size
- 150 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 8
- Pads
- 44
- Tracks, vias
- 59, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Apr 2026
- Updated
- 25 Apr 2026
Overview
Magic wand - electroboom is an open-source printed circuit board by DavidBojanovic08, from the DavidBojanovic08/Magic-wand repository on GitHub. It is a 2-layer board of 150 × 50 mm with 19 parts on 8 nets, routed with 59 tracks and 0 vias.
It is built around the IRF3205 and UF4007. Its parts include 5 resistors, 4 capacitors, 4 diodes, 3 inductors and 2 transistors.
Main components
2Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.33uF | Capacitor_THT:C_Rect_L11.0mm_W6.4mm_P10.00mm_MKT | C1, C2, C3, C4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R5 |
| 2 | 12V | Diode_THT:D_DO-15_P12.70mm_Horizontal | D1, D2 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R3, R4 |
| 2 | 5T | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | L1, L2 |
| 2 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q3, Q4 |
| 2 | UF4007 | Diode_THT:D_DO-15_P12.70mm_Horizontal | D3, D4 |
| 1 | 200uH | Inductor_THT_Wurth:L_Wurth_WE-HCFT-2012_LeadDiameter1.5mm | L3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers68 × 89 mm
ParanoiaBox
profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device
60 parts17 - 2 layers96.3 × 98 mm
Aquarium
baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.
73 parts11 - 2 layers100 × 70 mm
MotorDriver
JeyRunner/actonator
3D printable robot actuator with belt-driven gearbox and custom FOC driver board.
177 parts10MIT - 2 layers156.5 × 67.5 mm
NixieScanDisplay
profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.
106 parts10 - 4 layers147.8 × 77 mm
2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7 - 2 layers373 × 132.3 mm
Solarinverter
cpipero/solarinverter
Kicad Project to build a programmable Solar Inverter
370 parts5CC0-1.0 - 2 layers329.9 × 146.6 mm
Questions
How big is the Magic wand - electroboom PCB?
It measures 150 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Magic wand - electroboom use?
19 parts, built around the IRF3205 and UF4007. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magic wand - electroboom KiCad files?
From the DavidBojanovic08/Magic-wand repository on GitHub, at the commit this page was made from: the board is Magic wand - electroboom.kicad_pcb and its schematic Magic wand - electroboom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magic wand - electroboom design in my own project?
Its repository states no licence, so its author keeps all rights: ask DavidBojanovic08 before reusing the design.