

This is the full PCB for a PWM DC motor driver
- Size
- 93.2 × 66.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 14
- Pads
- 39
- Tracks, vias
- 50, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Aug 2026
- Updated
- 8 Aug 2026
Overview
PWM is an open-source printed circuit board by Davedelali, from the Davedelali/PWM-PCB-design- repository on GitHub. It is a 2-layer board of 93.2 × 66.3 mm with 17 parts on 14 nets, routed with 50 tracks and 0 vias.
It is built around the NE555P and IRF540N. Its parts include 3 diodes, 2 capacitors, 2 resistors, 2 connectors and 1 IC. It belongs with the robots and motor control boards of this library.
Main components
2Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1N4001 | Diode_THT:D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D1, D2 |
| 2 | C_Small | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 1 | 100K | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2 |
| 1 | 1N4004 | Diode_THT:D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D3 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:Nidec_Copal_CAS-120A | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
Similar boards
- 2 layers199.6 × 8.6 mm

- 2 layers72 × 33 mm

Positive Battery Charger Circuit
AbhishekGM23/PCB-Design
This repository contains various PCB design projects.
36 parts - 2 layers90.7 × 55.4 mm

H bridge V3
ambadran/Revolute_Joint
Optimal Cheap Robotic Actuator allowing high Torque and moderate Speed. Allow PRECISE Absolute, Speed and Torque Control. Using 3D-printed Cycloidal Drive, Custom PCB and LQR Control Algorithm.
57 parts - 2 layers180 × 133.3 mm

- 2 layers96.8 × 97 mm

Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers124.5 × 77.5 mm

- 2 layers55 × 90.8 mm

- 2 layers73.7 × 61 mm

Questions
How big is the PWM PCB?
It measures 93.2 × 66.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PWM use?
17 parts, built around the NE555P and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PWM KiCad files?
From the Davedelali/PWM-PCB-design- repository on GitHub, at the commit this page was made from: the board is PWM/PWM.kicad_pcb and its schematic PWM/PWM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PWM design in my own project?
Its repository states no licence, so its author keeps all rights: ask Davedelali before reusing the design.