

Wheelberry hat
Raspberry PI HAT for Wheelchair control
- Size
- 65 × 56 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 52
- Nets
- 90
- Pads
- 277
- Tracks, vias
- 357, 49
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Sep 2022
- Updated
- 1 Nov 2022
Overview
Wheelberry hat is an open-source printed circuit board by DarwinInnovation, from the DarwinInnovation/wheelberry_hat repository on GitHub. It is a 4-layer board of 65 × 56 mm with 52 parts on 90 nets, routed with 357 tracks and 49 vias.
It is built around the NUF4401MN, CAT24C128WI-GT3 and PCA9306D, with the YC164-FR-0710KL, 54602-908LF and SJ1-3533NG among its other parts. Its parts include 15 resistors, 14 capacitors, 7 ICs and 6 connectors.
Main components
8NUF4401MN
DFN-8-EP(2x2)-40℃~+85℃ 125MHz 15pF 2 35dB@900MHz~2.4GHz 4 Yes DFN-8-EP(2x2) EMI/RFI Filters (LC, RC Networks) ROHSonsemiEMI/RFI Filters (LC, RC Networks)CAT24C128WI-GT3
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 128Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSonsemiEEPROMPCA9306D
SO-8-40℃~+105℃ 1 1.8V~5.5V 1V~3.6V 2 2Mbps Automatic direction detection、Output enable high-impedance Bidirectional Level translator Open-drain SMBus、I2C SO-8 Translators, Level Shifters ROHSNXP SemiconductorsTranslators, Level ShiftersYC164-FR-0710KL
0603x410kΩ 4 62.5mW 8 ±1% ±200ppm/℃ 0603x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays54602-908LF
插件-40℃~+70℃ 1 12.7mm 15.3mm 17.74mm Copper Alloy Gold Harpoon Contact (Plastic) Non-LED Non-PoE RJ45 Jack Right Angle Unshielded cat3 Plugin Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAmphenolEthernet Connectors / Modular Connectors (RJ45 RJ11)SJ1-3533NG
插件,8.2x14mm-25℃~+85℃ 12.3mm 12V 18mm 1A 3.5mm Headphone Jack 8.2mm Brass Right-Angle TRS Tin 插件,8.2x14mm Audio Connectors ROHSCUIAudio Connectors10118194-0001LF
SMD-30℃~+80℃ 1 100V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors20SEPF560M
插件,D10xL13mm-55℃~+105℃ 10mm 12mΩ@100kHz 13mm 20V 5.4A@100kHz 5000hrs@105℃ 560uF 5mm Plug-in Polarized Polymer ±20% Plugin,D10xL13mm Polymer Aluminum Capacitors ROHSPanasonicPolymer Aluminum Capacitors
README
README.mdwheelberry_hat
Raspberry PI HAT for Wheelchair control
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R4, R5, R10, R11 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 4 | NUF4401MN | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.7x1.3mm | U4, U5, U6, U7 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R12 |
| 3 | 47 | Resistor_SMD:R_0805_2012Metric | R13, R14, R15 |
| 2 | 100k | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 2 | 10k | Resistor_SMD:R_Array_Convex_4x0603 | RN3, RN4 |
| 2 | 2k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 3.9k | Resistor_SMD:R_0805_2012Metric | R6, R9 |
| 2 | 54602-908LF | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J3, J6 |
| 2 | SJ1-3533NG | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J4, J5 |
| 1 | 10118194-0001LF | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J2 |
| 1 | 180k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 2 pin header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 40 pin header | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | 560u | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm_P5.00mm | C4 |
| 1 | CAT24C256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LOGO | wheelberry:darwin_innovation_logo | G*** |
| 1 | MCP23017_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U3 |
| 1 | PCA9306D | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1 |
Similar boards
- 4 layers160 × 110 mm

- 4 layers21.5 × 28 mm

- 4 layers191.2 × 190.9 mm

Neptune
Board-Folk/Neptune
Recreation of the cancelled Sega console that combines Mega Drive/Genesis with 32X.
379 parts180 - 4 layers100 × 60 mm

- 4 layers50 × 50 mm

Zicote
0sirys/SmartInsole_PF_PCB
Proyecto final, plantilla para medicion de presion plantar
62 partsMIT - 6 layers167.5 × 79 mm

- 4 layers124.6 × 68.7 mm

- 2 layers212.5 × 99.5 mm

Questions
How big is the Wheelberry hat PCB?
It measures 65 × 56 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Wheelberry hat use?
52 parts, built around the NUF4401MN, CAT24C128WI-GT3, PCA9306D and YC164-FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wheelberry hat KiCad files?
From the DarwinInnovation/wheelberry_hat repository on GitHub, at the commit this page was made from: the board is wheelberry_hat.kicad_pcb and its schematic wheelberry_hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wheelberry hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask DarwinInnovation before reusing the design.