Darshan7052006/PCB-Design-ProjectsCollection of PCB designs created using KiCad. Includes power supplies, embedded systems, sensor boards, and hardware projects with schematics, PCB layouts, manufacturing files, and documentation.
Project-04-Predictive Maintenance system PCB is an open-source printed circuit board by Darshan7052006, from the Darshan7052006/PCB-Design-Projects repository on GitHub. It is a 4-layer board of 53.3 × 59.6 mm with 32 parts on 65 nets, routed with 365 tracks and 30 vias.
It is built around the ESP32-DEVKITM-1, L298N and MPU-6050. Its parts include 10 capacitors, 8 diodes, 5 ICs, 4 connectors and 3 resistors. It belongs with the ESP32 boards of this library.
Collection of PCB designs created using KiCad. Includes power supplies, embedded systems, sensor boards, and hardware projects with schematics, PCB layouts, manufacturing files, and documentation.
Welcome to my PCB design portfolio.
This repository contains PCB designs created using KiCad as part of my learning journey in electronics and embedded systems.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D_Schottky | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D5, D6, D7, D8, D9, D10, D11, D12 |
| 6 | 0.1uf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3, C5, C7, C8, C9 |
| 3 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 1 | 100 nf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C10 |
| 1 | 10kohms | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10nf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 1nf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C6 |
| 1 | 2.2nf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 220 ohms | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | ACS712xLCTR-30A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | Conn_01x16_Socket | Connector_PCBEdge:Samtec_MECF-08-01-NP-L-DV_2x08_P1.27mm_Socket_Horizontal | J1 |
| 1 | ESP32-DEVKITM-1 | esp32devkit1:MODULE_ESP32-DEVKITM-1 | U5 |
| 1 | L298N | Package_TO_SOT_THT:TO-220-15_P2.54x5.08mm_StaggerOdd_Lead4.58mm_Vertical | U4 |
| 1 | LM35-NEB | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U3 |
The 31 most common of 32 parts.
Darshan7052006/PCB-Design-Projects
Collection of PCB designs created using KiCad. Includes power supplies, embedded systems, sensor boards, and hardware projects with schematics, PCB layouts, manufacturing files, and documentation.
Darshan7052006/PCB-Design-Projects
Collection of PCB designs created using KiCad. Includes power supplies, embedded systems, sensor boards, and hardware projects with schematics, PCB layouts, manufacturing files, and documentation.
Darshan7052006/PCB-Design-Projects
Collection of PCB designs created using KiCad. Includes power supplies, embedded systems, sensor boards, and hardware projects with schematics, PCB layouts, manufacturing files, and documentation.
dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.
Robbie-2055/Self-Balancing-Robot-STM32-
A two-wheeled self-balancing inverted pendulum robot built using an STM32 microcontroller. The robot utilizes an MPU6050 Inertial Measurement Unit (IMU) to sense its orientation, processes this data through a PID loop…
It measures 53.3 × 59.6 mm and has 4 copper layers, 1.6 mm thick.
32 parts, built around the ESP32-DEVKITM-1, L298N and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Darshan7052006/PCB-Design-Projects repository on GitHub, at the commit this page was made from: the board is Project-04-Predictive-Maintenance-system-PCB/Project-04-Predictive-Maintenance-system-PCB.kicad_pcb and its schematic Project-01-Breadboard-Power-Supply/BreadboardPowerSupply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Darshan7052006 before reusing the design.