

FlowState
A project to learn NumPy and embedded systems.
- Size
- 53 × 56.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 39
- Pads
- 99
- Tracks, vias
- 191, 15
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 May 2026
- Updated
- 12 May 2026
Overview
FlowState is an open-source printed circuit board by DarrenChan99, from the DarrenChan99/PlantVision repository on GitHub. It is a 2-layer board of 53 × 56.6 mm with 14 parts on 39 nets, routed with 191 tracks and 15 vias.
It is built around the AMS1117-3.3. Its parts include 6 connectors, 3 capacitors, 2 resistors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdPlantVision
Plant Vision is a data driven project that aims to use onboard sensors to display useful information and warnings to the user like a predictive watering algorithm and CO2 threshold monitor to help optimally track and water plants and improve productivity through elevated CO2 level warnings, signaling to the user it might be time to step outside.
Why?
Recently one of my plants died to unknown factors and I realized that I was guessing when to water and how much sun to give it. At this same time I was getting into C++, microcontrollers, and data based algorithms to build my skills. So after some brainstorming this project perfectly encapsulated my needs while providing a hardware challenge with the custom PCB and an open software ceiling where I could explore data algorithms like the low pass filter and predictive irrigation and experiment with python to better visulize the data and show it on the LCD.
Gallery
Schematic
PCB Layout
3D Render
CAD View (Front)
CAD View (Back)
BOM
| Component | Description | Part Number | Source | Qty | Notes |
|---|---|---|---|---|---|
| USB-C | 16-pin (USB 2.0), Top Mount, Right Angle | USB4105-GF-A | DigiKey | 1 | Exact match for HRO footprint. 5A Rated. |
| CO2 / Temp / Hum | Sensirion SCD41 Photoacoustic Sensor | SCD41 | AliExpress | 1 | High accuracy air quality sensing (I2C). |
| Microcontroller | ESP32 DevKit V1 (Narrow 30-Pin) | ESP-WROOM-32 | Amazon | 1 | Dual-core processor with Wi-Fi/Bluetooth. |
| Voltage Regulator | 3.3V 800mA LDO (TO-220) | LD1117V33 | DigiKey | 1 | Converts 5V USB power to 3.3V. |
| Input Cap (C1) | 10µF 25V Electrolytic Radial | 860020472003 | DigiKey | 1 | Bulk filter for 5V rail (Würth ATG5). |
| Output Cap (C2) | 47µF 16V Electrolytic Radial | 860010372004 | DigiKey | 1 | Stabilizes 3.3V rail (Würth ATG8). |
| Bypass Cap (C3) | 100nF 50V X7R Ceramic Radial | K104K10X7RF5UH5 | DigiKey | 1 | High-frequency noise filter (Vishay). |
| Resistors | 5.1k Ohm 1/4W 1% Metal Film | MFR-25FTE52-5K1 | DigiKey | 2 | Required for SDA/SCL data stability. |
| Soil Sensor | Capacitive Moisture Sensor v1.2 | Generic | Amazon | 1 | Corrosion-resistant soil tracking. |
| LCD Touchscreen | 2.8" or 3.5" TFT SPI Display | ILI9341 | Amazon | 1 | User interface and data visualization. |
| Solder Wire | 0.6mm 63/37 Rosin Core | Generic | Amazon | 1 | Precision gauge for USB-C soldering. |
| Custom PCB | 1.6mm thick, 2 layer | Generic | JLPCB | 1 | Wiring |
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x02_Pin(Switch) | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x03_Pin (SOIL) | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Pin (CO2) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin(SD) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x14_Pin(LCD) | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J3 |
| 1 | ESP32-DEVKIT-V1 | devkit:MODULE_ESP32_DEVKIT_V1 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the FlowState PCB?
It measures 53 × 56.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FlowState use?
14 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FlowState KiCad files?
From the DarrenChan99/PlantVision repository on GitHub, at the commit this page was made from: the board is PCB/FlowState.kicad_pcb and its schematic PCB/FlowState.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FlowState design in my own project?
Its repository states no licence, so its author keeps all rights: ask DarrenChan99 before reusing the design.