
Lilygo t internet breakout
DanNixon/esphome_devices
Configuration/code for custom smarthome devices.

Configuration/code for custom smarthome devices.
Doit esp32 devkit breakout is an open-source printed circuit board by DanNixon, from the DanNixon/esphome_devices repository on GitHub. It is a 2-layer board of 58.4 × 58.4 mm with 25 parts on 34 nets, routed with 87 tracks and 1 via.
It is built around the DS18B20 and WS2812. Its parts include 13 connectors, 2 ICs and 1 resistor. It belongs with the home automation and IoT and interfaces and adapters boards and the ESP32 and ESP8266 boards of this library.
Configuration, code and CAD for custom smarthome devices, powered by ESPHome.
| Board | Module | SoC | Buy | Notes |
|---|---|---|---|---|
| LILYGO T-Internet POE | ESP32-WROOM-32E | ESP32-D0WD-V3 | AliExpress | |
| DOIT ESP32 DevKit USB-C | ESP32-WROOM-32 | ESP32-D0WDQ6 | AliExpress | |
| WeMos D1 Mini | TODO | ESP8266 | TODO |
| Type | Part | ESPHome | Buy | Notes |
|---|---|---|---|---|
| Temperature sensor | DS18B20 | dallas | AliExpress | |
| VOC and NOx sensor | SGP41 | sgp4x | AliExpress | |
| CO2 sensor | SenseAir S8 | senseair | AliExpress | datasheet |
| Particulate matter sensor | PMS5003 | pmsx003 | AliExpress | |
| Temperature and humidity sensor | AHT20 | aht10 | AliExpress | |
| Light sensor | BH1750 | bh1750 | AliExpress | |
| IO expander | SX1509 | sx1509 | AliExpress |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | i2c | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8, J9, J10, J11, J12, J13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J3 |
| 2 | i2c V | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP5, JP6 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | DOIT-ESP32-DEVKIT | esphome_devices:DOIT-ESP32-DEVKIT | U1 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | Expansion | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | OneWire | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | UART1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | UART1 V | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | UART2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | UART2 V | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 1 | WS2812 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | WS2812 V | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |

DanNixon/esphome_devices
Configuration/code for custom smarthome devices.


DanNixon/esphome_devices
Configuration/code for custom smarthome devices.

Technolitix/Sauna-Contoller
Standalone sauna controller running ESPHome, compatible with Home Assistant for smart temperature, timer, and lighting control.


zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.

ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor


cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering

It measures 58.4 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the DS18B20 and WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DanNixon/esphome_devices repository on GitHub, at the commit this page was made from: the board is modular_sensors/breakout_boards/doit_esp32_devkit/doit_esp32_devkit_breakout.kicad_pcb and its schematic devices/boiler/pcb/boiler_breakout_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DanNixon before reusing the design.