Skip to the content
2 layers80.5 × 75.1 mmF411-TableClock, the printed circuit board in 3D
Size
80.5 × 75.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
84
Pads
282
Tracks, vias
654, 125
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 Apr 2026
Updated
24 Sep 2026

Overview

F411-TableClock is an open-source printed circuit board by DRIFTYY777, from the DRIFTYY777/F411-TableClock repository on GitHub. It is a 2-layer board of 80.5 × 75.1 mm with 61 parts on 84 nets, routed with 654 tracks and 125 vias.

It is built around the AM2302, DW01A and TP4056-42-ESOP8, with the BC547, DMG3415U and FS8205A among its other parts. Its parts include 21 resistors, 14 capacitors, 5 ICs, 5 transistors and 5 connectors. It belongs with the STM32 boards of this library.

Main components

6

Parts

61
QtyValueFootprintReferences
1610kResistor_SMD:R_0805_2012MetricR1, R2, R5, R6, R7, R8, R9, R10, R11, R12, R14, R15, R18, R19, R20, R21
1010ufCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C6, C7, C8, C9, C13, C14
4SW_PushButton_Switch_SMD:SW_SPST_TL3342SW1, SW2, SW3, SW4
35.2kResistor_SMD:R_0805_2012MetricR3, R4, R13
20.25pFResistor_SMD:R_0805_2012MetricC11, C12
21N5819Diode_SMD:D_0805_2012MetricD1, D2
2BC547Package_TO_SOT_SMD:TSOT-23Q2, Q3
2DMG3415UPackage_TO_SOT_SMD:SOT-23Q1, Q5
1100EResistor_SMD:R_0805_2012MetricR17
1100nfCapacitor_SMD:C_0805_2012MetricC15
11kResistor_SMD:R_0805_2012MetricR16
12.2ufCapacitor_SMD:C_0805_2012MetricC10
1AM2302Sensor:ASAIR_AM2302_P2.54mm_VerticalU3
1AP2204K-3.3Package_TO_SOT_SMD:SOT-23-5U2
1BatteryBattery:BatteryHolder_MPD_BK-18650-PC2BT1
1Battery_CellBattery:Battery_Panasonic_CR2032-HFN_Horizontal_CircularHolesBT2
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x09_SocketConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ5
1Conn_01x09_SocketConnector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_VerticalJ4
1Conn_01x16_SocketConnector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_VerticalJ2
1CrystalCrystal:Crystal_AT310_D3.0mm_L10.0mm_VerticalY1
1DW01APackage_TO_SOT_SMD:SOT-23-6U5
1FS8205APackage_SO:TSSOP-8_4.4x3mm_P0.65mmQ4
1LEDLED_SMD:LED_0805_2012MetricD3
1STM32F411CCUxPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mmU1
1TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalViasU4
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1

Similar boards

  • 4 layers130 × 65 mmMyConsole, the printed circuit board in 3D

    MyConsole

    krishecejee1008-creator/MiKrida-PCB

    81 parts
  • 4 layers50.8 × 22.9 mmZb1, the printed circuit board in 3D

    Zb1

    danindiana/zemizdat

    This folder holds the complete electronic CAD for the ZB-1 development board:

    71 partsApache-2.0
  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 2 layers61 × 61 mmESP32 FC, the printed circuit board in 3D

    ESP32 FC

    MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER

    A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.

    69 parts7Apache-2.0
  • 2 layers51.1 × 95 mmTalk e, the printed circuit board in 3D

    Talk e

    milovanpms/talk-e

    📻 — A simple LoRa-based talkie-walkie built on ESP32, operating on the 433 MHz frequency band for long-range, low-power wireless communication.

    75 parts4
  • 2 layers80 × 34 mmDji fcc, the printed circuit board in 3D

    Dji fcc

    nikolaus018/dji-fcc-esp32

    ESP32-S3 firmware that switches a DJI N1 remote to FCC mode over USB (replaces the Android app)

    69 parts3MIT
  • 2 layers30 × 25 mmProject2, the printed circuit board in 3D

    Project2

    devKOff/pcb-lipo-power-management-system

    An integrated PCB power management system for single-cell Li-Po batteries featuring onboard charging, circuit protection, and a DC-DC boost converter with selectable 5V and 12V DC outputs.

    28 parts2
  • 2 layers102.6 × 102.6 mmMini robot2, the printed circuit board in 3D

    Mini robot2

    eliasmonzon/pcb

    circuitos_electronicos

    67 parts1

Questions

How big is the F411-TableClock PCB?

It measures 80.5 × 75.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the F411-TableClock use?

61 parts, built around the AM2302, DW01A, TP4056-42-ESOP8 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the F411-TableClock KiCad files?

From the DRIFTYY777/F411-TableClock repository on GitHub, at the commit this page was made from: the board is F411-TableClock.kicad_pcb and its schematic F411-TableClock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the F411-TableClock design in my own project?

Its repository states no licence, so its author keeps all rights: ask DRIFTYY777 before reusing the design.