
PCB Khess Module Payment
DBXYD/2526_Projet1AB_Khess
La modélisation 3D de ces différentes pièces à été réaliser avec le logiciel Onshape, voici les liens correspondant : Caisse entière avec socle Module paiement final Support tablette final

La modélisation 3D de ces différentes pièces à été réaliser avec le logiciel Onshape, voici les liens correspondant : Caisse entière avec socle Module paiement final Support tablette final
PCB Khess Cash Drawer is an open-source printed circuit board by DBXYD, from the DBXYD/2526_Projet1AB_Khess repository on GitHub, published under the MIT licence. It is a 2-layer board of 121 × 60.1 mm with 25 parts on 15 nets, routed with 64 tracks and 362 vias.
It is built around the R-78B5.0-2.0, 10D561K and BUK9637-100E,118-VB, with the DST10100S among its other parts. Its parts include 4 capacitors, 3 resistors, 3 connectors, 2 diodes and 1 IC.
[!Note] Projet de 1ère année ENSEA sur une caisse enregistreuse pour la K-Fet.
[!Important] Ce projet reprend en partie le travail de Matis Garbez, disponible sur 2425_Maker_CashRegister.

Voir Hardware/README.md.
La caisse automatique est consituée de 3 éléments :
La modélisation 3D de ces différentes pièces à été réaliser avec le logiciel Onshape, voici les liens correspondant :
Cette section regroupe l'ensemble du code source de l'application web de la caisse connectée, développée avec le framework Django (Python).
Note sur le dépôt : Suite à des difficultés techniques lors de la synchronisation et de l'envoi du code sur le dépôt partagé de l'équipe, la version la plus récente et totalement à jour de l'application a été temporairement hébergée sur mon espace personnel.
Le système s'appuie sur une base de données relationnelle structurée pour gérer les profils des étudiants, leurs soldes (cotisants ou non), le catalogue de la K-FET et l'historique des ventes.
Voir Journal_de_bord.md.
Modélisation 3D:
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
|---|---|---|---|---|---|---|
| @Ahhj93 Bryan-Sowanna Ing | @NKRIMAT Naïm Krimat | @Margaux-Lapl Margaux Laplante | @StrangeKobe Rayan Laghouane | @zhang-estelle Estelle Zhang | @ClementJ493 Clément Jouneau | @rim-05-mma Rim Bouchikhi |
Ce projet est distribué sous la licence MIT — voir LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1, H2, H3, H4 |
| 1 | Cutout_Pinheader_01x02_254 | ||
| 1 | Cutout_Pinheader_01x03_254 | ||
| 1 | Cutout_Pinheader_02x04_254 | ||
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C4 |
| 1 | 10D561K | MOV-10D561K:VAR_MOV-10D561K | RV1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 6.8 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | R3 |
| 1 | 824 500 500 | Diode_SMD:D_SMA | D2 |
| 1 | BUK9637-100E,118 | Package_TO_SOT_SMD:TO-263-2 | Q1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | DST10100S | Package_TO_SOT_SMD:TO-277A | D1 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | PSK-15E-12 | PSK-15E-12:CONV_PSK-15E-12 | PS2 |
| 1 | R-78B5.0-2.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78B-2.0_THT | U1 |
| 1 | RJ11_Connector | Connector_RJ:RJ12_Amphenol_54601-x06_Horizontal | J3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |

DBXYD/2526_Projet1AB_Khess
La modélisation 3D de ces différentes pièces à été réaliser avec le logiciel Onshape, voici les liens correspondant : Caisse entière avec socle Module paiement final Support tablette final

Arlausea/2324_Projet2A_Eve
Upgrade of a robot arm to help disabled people in everyday life

AresEnsea/2324_Projet2A_AresCFR
Ce repository GitHub regroupe l'ensemble des projets & documents réalisés par l'association Ares pour la Coupe de France de Robotique 2024 – Farming Mars.




matthieuvigne/MiAM_robotics
Generic repo for robotic projects with the former MiAM Eurobot team !

LesKaribous/Karibous-2023-Hardware
Hardware du robot des Karibous pour la Coupe de Robotique (Eurobot) 2022

It measures 121 × 60.1 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the R-78B5.0-2.0, 10D561K, BUK9637-100E,118-VB and DST10100S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DBXYD/2526_Projet1AB_Khess repository on GitHub, at the commit this page was made from: the board is Hardware/PCB_Khess_Cash_Drawer/PCB_Khess_Cash_Drawer.kicad_pcb and its schematic Hardware/PCB_Khess_Cash_Drawer/PCB_Khess_Cash_Drawer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).