Skip to the content
2 layers33.5 × 47.8 mmLCD Touch, the printed circuit board in 3D

Example of the kicad-display symbol repository being used to create a breakout board

Size
33.5 × 47.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
15
Pads
47
Tracks, vias
146, 14
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Mar 2025
Updated
30 Mar 2025

Overview

LCD Touch is an open-source printed circuit board by Cuprum77, from the Cuprum77/kicad-display-breakout-example repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 33.5 × 47.8 mm with 10 parts on 15 nets, routed with 146 tracks and 14 vias.

It is built around the BC817. Its parts include 3 capacitors, 3 resistors, 1 transistor and 1 connector. It belongs with the lEDs and displays and interfaces and adapters boards of this library.

Main components

1

README

README.md

kicad-display Breakout example

This repository contains a simple breakout board for a 1.69" IPS LCD with capacitive touch, and serves as an example of the KiCad project structure.

It was intended to be used with the following display from AliExpress, however this flat-flex cable is not solderable, and requires a FPC connector to be soldered onto the PCB. This was originally an oversight on my part, and the PCB that was produced did not feature this footprint, which required manual rework of soldering individual wires directly to the FPC. This version should be fixed, although it has never been produced.

Requirements

Pulling the repository

Remember to pull recursive submodules to include the display library if you are using git to clone the repository!

bash
git submodule update --init --recursive

Bill of Materials (BOM)

ReferenceValueQuantitySource
DS11.69" IPS LCD with capacitive touch, FPC connector with 0.5mm pitch1Digikey
C1, C2, C3100 nF 06033Digikey
R11k 06031Digikey
R210k 06031Digikey
R30R 060311Digikey
J11x12 2.54mm Header1Digikey

Affiliation

I am in no way affiliated with any of the companies mentioned in this document. The links to the products are provided for convenience and are not endorsements of any kind. The products may be available from other sources, and I encourage you to shop around for the best price and availability.

The PCB however were paid for by Aisler as a part of a single-time sponsorship through a store-credit. I am under no contract or obligation to promote their services, and I have no financial interest in their success.

License

This project is licensed under CERN Open Hardware License Version 2 - Strong Reciprocity (CERN-OHL-S-2.0). See LICENSE for more details.

Footnotes

  1. Note that R3 can be shorted by a solder bridge if you don't have a 0R resistor. This is an optional resistor to limit the current to the LCD backlight. The backlight consists of 3 LEDs in parallel and can pull up to 60 mA. With a 3V3 supply and a BJT as a switch, the voltage over the LED will be slightly below the nominal forward voltage of 3 V. ↩

Parts

10
QtyValueFootprintReferences
3100nCapacitor_SMD:C_0603_1608MetricC1, C2, C3
10Resistor_SMD:R_0603_1608MetricR3
11.69" Touch LCDSFV18R_4STBE1HLF:AMPHENOL_SFV18R-4STBE1HLFDS1
110kResistor_SMD:R_0603_1608MetricR2
11kResistor_SMD:R_0603_1608MetricR1
1BC817Package_TO_SOT_SMD:SOT-23Q1
1Conn_01x12Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ1
1LOGOLOGOG***

Similar boards

  • 2 layers72 × 42 mmNRF24 jammer, the printed circuit board in 3D

    NRF24 jammer

    W0rthlessS0ul/nRF24_jammer

    The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

    51 parts1kMIT
  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers65 × 56.5 mmRPiG3iMac, the printed circuit board in 3D

    RPiG3iMac

    qbancoffee/imac_g3_ivad_board_init

    iMac G3 IVAD board initialization with an arduino

    44 parts240LGPL-3.0
  • 6 layers83.5 × 56 mmEspiff v3 1, the printed circuit board in 3D

    Espiff v3 1

    MDCservice/EsPiFF

    An ESP32 in the Raspberry Pi form factor

    172 parts223GPL-3.0
  • 2 layers87.9 × 98.7 mmBitdoglab smd, the printed circuit board in 3D

    Bitdoglab smd

    BitDogLab/BitDogLab

    Open-source educational hardware for embedded systems, programming, electronics, and physical computing.

    138 parts203
  • 2 layers77 × 100 mmBeamer1, the printed circuit board in 3D

    Beamer1

    shufps/diy-projector-clock

    DIY Projector Clock

    283 parts172
  • 2 layers84.2 × 52 mmPicoPico, the printed circuit board in 3D

    PicoPico

    DavidVentura/PicoPico

    Pico-8 Player

    57 parts141
  • 4 layers129 × 104.6 mmPC-1100X, the printed circuit board in 3D

    PC-1100X

    zscircuits/zs1100a

    All files hardware and software related to the zs1100a

    528 parts76

Questions

How big is the LCD Touch PCB?

It measures 33.5 × 47.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LCD Touch use?

10 parts, built around the BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LCD Touch KiCad files?

From the Cuprum77/kicad-display-breakout-example repository on GitHub, at the commit this page was made from: the board is LCD_Touch.kicad_pcb and its schematic LCD_Touch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LCD Touch design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).