Skip to the content
4 layers38.1 × 61 mmBoard prototype TQFP, the printed circuit board in 3D

Board prototype TQFP

Cavendish06/Keyboard-s-project

For now only a prototype PCB has been developped to test the firmware which will be QMK.

Size
38.1 × 61 mm
Copper layers
4
Thickness
1.6 mm
Parts
27
Nets
45
Pads
155
Tracks, vias
286, 72
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Apr 2026
Updated
9 Apr 2026

Overview

Board prototype TQFP is an open-source printed circuit board by Cavendish06, from the Cavendish06/Keyboard-s-project repository on GitHub. It is a 4-layer board of 38.1 × 61 mm with 27 parts on 45 nets, routed with 286 tracks and 72 vias.

It is built around the ATMEGA32U4-MU and PRTR5V0U2X. Its parts include 11 capacitors, 4 connectors, 3 resistors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

For now only a prototype PCB has been developped to test the firmware which will be QMK.

To see the board, load the .kicad_pro file into kicad.

Parts

27
QtyValueFootprintReferences
70.1μFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C5, C7, C9, C10, C11
210kResistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolderR1, R2
215pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3, C4
222Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderD-, D+
25.1KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderCC1, CC2
110μFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY2
11μFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6
1330Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolderR3
1500mModule:Polyfuse 1206F1
1ATmega32U4-MPackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1AVR-ISP-6Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMDJ4
1Conn_01x07_PinConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ2
1Conn_01x20_SocketConnector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1
1PRTR5V0U2XPackage_TO_SOT_SMD:SOT-143D1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ3
1~Button_Switch_SMD:SW_SPST_SKQG_WithStemU2

Similar boards

  • 2 layers344 × 124.5 mmUniversalTKL, the printed circuit board in 3D

    UniversalTKL

    ojthetiny/OpenTKL

    Fully Open source TKL keyboard

    175 parts103GPL-3.0
  • 2 layers285 × 95.1 mmJ67G, the printed circuit board in 3D

    J67G

    Salicylic-acid3/PCB_Data

    158 parts51MIT
  • 2 layers285 × 95.1 mmUnison, the printed circuit board in 3D

    Unison

    jpskenn/Unison

    2-way turn around keyboard for Computer & Music

    284 parts23MIT
  • 2 layers284.3 × 116.2 mmNormal-60, the printed circuit board in 3D

    Normal-60

    keyboardio/Keygen

    A keyboard generator tool

    152 parts17
  • 2 layers285.7 × 95.5 mmJones, the printed circuit board in 3D

    Jones

    jpskenn/Jones

    Row-staggered 60% keyboard with gapless R2-R3 row. GH60 case compatible.

    249 parts12MIT
  • 2 layers285 × 95.1 mmNora, the printed circuit board in 3D

    Nora

    jpskenn/Nora

    Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.

    303 parts12MIT
  • 2 layers209.6 × 76.2 mmDidaktik, the printed circuit board in 3D

    Didaktik

    calvin-mcd/Didaktik-40

    a 40s keyboard inspired by the Didaktik computer & keyboard

    129 parts9GPL-3.0
  • 2 layers228.4 × 85 mmLeChiffre, the printed circuit board in 3D

    LeChiffre

    paindrivendev/le-yiffre

    Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.

    108 parts8

Questions

How big is the Board prototype TQFP PCB?

It measures 38.1 × 61 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Board prototype TQFP use?

27 parts, built around the ATMEGA32U4-MU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Board prototype TQFP KiCad files?

From the Cavendish06/Keyboard-s-project repository on GitHub, at the commit this page was made from: the board is Board prototype TQFP.kicad_pcb and its schematic Board prototype TQFP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Board prototype TQFP design in my own project?

Its repository states no licence, so its author keeps all rights: ask Cavendish06 before reusing the design.