Skip to the content
2 layers50 × 32.5 mmWürfel, the printed circuit board in 3D

For our open workshop day I made the following module. It's a simple 6-eyed dice with a Attiny85.

Size
50 × 32.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
17
Pads
54
Tracks, vias
120, 5
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20170922)
Created
12 Nov 2017
Updated
12 Nov 2017

Overview

Würfel is an open-source printed circuit board by CarosCave, from the CarosCave/wuerfel repository on GitHub. It is a 2-layer board of 50 × 32.5 mm with 19 parts on 17 nets, routed with 120 tracks and 5 vias.

It is built around the ATTINY85-20PU. Its parts include 7 resistors, 7 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

wuerfel

For our open workshop day I made the following module. It's a simple 6-eyed dice with a Attiny85.

You will find the:

  • CAD-Files in the folder KiCAD
  • The Arduino-Sketch in the folder Arduino
  • The PDF documents in the folder PDF
  • The licence files from CERN OHL v. 1.2 under Licence

Or you order the complete Project by my friends from Aisler B.V.. The will deliver the complete project incl. all parts. You'll find the project under the following link: https://aisler.net/DK1CMB/workshop_kicad/wurfel

Licence:

Copyright Caroline Brix 2017.
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2. You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

Parts

19
QtyValueFootprintReferences
71kResistors_SMD:R_1206_HandSolderingR1, R2, R3, R4, R5, R6, R7
7LEDLEDs:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7
1100nFResistors_SMD:R_1206_HandSolderingC1
1ATTINY85-20PUHousings_DIP:DIP-8_W7.62mmU1
1Conn_02x03_Odd_EvenPin_Headers:Pin_Header_Straight_2x03_Pitch2.54mmJ2
1SW_Push_Dualuser_buttons:SW_TH_Tactile_Omron_B3F-10xxSW1
1USB_B_WEuser_USB:USB_B_THT_WEJ1

Similar boards

  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0
  • 2 layers101.5 × 54 mmSimkarte, the printed circuit board in 3D

    Simkarte

    osmocom/osmocom-analog

    Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog

    15 parts32GPL-3.0
  • 2 layers76.2 × 50.8 mmJerboa-8, the printed circuit board in 3D

    Jerboa-8

    strickyak/jerboa-attiny85-mod-synth

    Modular Synthesizer using an ATtiny85 chip for each module.

    23 parts31MIT
  • 2 layersCastVolumeKnob, the printed circuit board in 3D

    CastVolumeKnob

    WebmasterTD/CastVolumeKnob

    Hardware Volume Knob for Google Cast devices

    18 parts25
  • 2 layers55.9 × 55.9 mmPrintplaat, the printed circuit board in 3D

    Printplaat

    floriaanpost/wonderfoon

    Een nieuwe implementatie van de wonderfoon

    14 parts24
  • 2 layers71.1 × 40.6 mmTiny blinky, the printed circuit board in 3D

    Tiny blinky

    Hack-a-Day/Remoticon_KiCad_Blender

    support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop

    21 parts22
  • 2 layers242 × 60 mmRoothubs, the printed circuit board in 3D

    Roothubs

    gkiefer/home2l

    The Home2Ls - Smart Tools for a Private Home

    178 parts21

Questions

How big is the Würfel PCB?

It measures 50 × 32.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Würfel use?

19 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Würfel KiCad files?

From the CarosCave/wuerfel repository on GitHub, at the commit this page was made from: the board is KiCad/Würfel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Würfel design in my own project?

Its repository states no licence, so its author keeps all rights: ask CarosCave before reusing the design.