
PCB Projet 1A
CaptainJaja/Projet_1A_S6
Voici le projet de première année du deuxième semestre, pour le groupe Janus-Christophe-Raphaëlle

Voici le projet de première année du deuxième semestre, pour le groupe Janus-Christophe-Raphaëlle
PCB projetV2 is an open-source printed circuit board by CaptainJaja, from the CaptainJaja/Projet_1A_S6 repository on GitHub. It is a 4-layer board of 63.4 × 41.1 mm with 51 parts on 59 nets, routed with 264 tracks and 413 vias.
It is built around the R-78B5.0-2.0 and BU33SD5WG-TR. Its parts include 23 capacitors, 14 connectors, 3 resistors, 1 IC and 1 inductor. It belongs with the STM32 boards of this library.
Ce projet consiste à concevoir un robot télécommandé via Bluetooth grâce à une application Android, avec odométrie, détection d'obstacles, et supervision ROS.
| Composant | Référence | Rôle |
|---|---|---|
| Microcontrôleur | STM32 (modèle à préciser) | Gestion des moteurs, capteurs, servo et communication Bluetooth |
| Module Bluetooth | HC-06 / HC-05 | Communication avec l’application Android |
| Moteurs DC à encodeur | GA12-N20 + encodeur magnétique | Déplacement du robot + odométrie |
| Driver moteur | TB6612FNG | Pilotage des moteurs |
| Batterie | LiPo 7.4V (capacité à préciser) | Alimentation du système |
| Régulateurs de tension | 7.4V → 5V (R-78B5.0-2.0), 5V → 3.3V (BU33SD5WG-TR) | Alimentation des composants |
| Capteur ultrason | HC-SR04 | Détection d'obstacles |
| Module infrarouge | (modèle à préciser) | Détection de ligne ou d'obstacle proche |
| Servomoteurs | (modèle à préciser) x2 | Actionneurs divers |
| LEDs | 2x minimum | Indicateurs visuels |
| Raspberry Pi | (modèle à préciser) | Exécution de ROS et traitement haut niveau |
Notre projet comporte deux versions de PCB :
| Séance | Avancement |
|---|---|
| Séance 1 | Répartition des tâches (modélisation 3D / code + PCB / appli Android), choix des composants |
| Séance 2 | - Début du PCB V1 (sans encodeur, Raspberry, infrarouge) - Début application Android - Début modélisation mécanique |
| Séance 3 | - Finalisation du PCB V1 - 1ère version de l'application (nombreuses fonctionnalités manquantes) -la conception 3D continue d'avancer |
| Séance 4 | - Début des tests du module HC-05 - Implémentation des fonctionnalités mais beaucoup d'erreurs -changement des dimensions de la structure 3D car changement d'agencement des éléments dans le robot |
| Séance 5 | Finalisation de la commande à distance (prototype robot avec HC-05) -la conception 3D continue d'avancer |
| Séance 6 | - Début du PCB V2 (ajout Raspberry, encodeurs, infrarouge) - Plus d'erreurs grâce aux bonnes permissions demandées - début de l'impression 3D |
| Séance 7 | Finalisation du modèle du PCB V2, commande des composants et du PCB -fin de l'impression 3D |
| Séance 8 | Finalisation du modèle 3D, montage PCB et robot prototype, test |
| Séance 9 | Corrections et impressions 3D, montage du robot final |
| Nom | Tâche principale |
|---|---|
| CAPODAGI Janus | Conception PCB (https://github.com/CaptainJaja/Projet_1A_S6/tree/main/Hardware/PCB), code STM32 (https://github.com/CaptainJaja/Projet_1A_S6/tree/main/Software/Code) |
| BUI HAI Christophe | Développement de l’application Android (https://github.com/CaptainJaja/Projet_1A_S6/tree/main/Application) |
| MILLON Raphaëlle | Conception mécanique du robot :modélisation 3D, intégration Raspberry (https://github.com/CaptainJaja/Projet_1A_S6/tree/main/Hardware/3D) |
Ce README est susceptible d'être mis à jour au fur et à mesure de l'avancement du projet. 🚀
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C5, C8, C9, C10, C12, C21, C22, C23 |
| 7 | 10u | Capacitor_SMD:C_0603_1608Metric | C4, C6, C15, C16, C18, C19, C20 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | H2, H3, H4 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C11, C13 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5, J6 |
| 2 | Conn_01x06 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J4, J9 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 39n | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 430471025826 | bouton_Wurth_SMD:430471025826 | Switch1 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | BU33SD5WG-TR | BU33SD5WG-TR:SOT95P280X125-5N | J3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J14 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | Conn_01x06 | Connector_JST:JST_XH_S6B-XH-A-1_1x06_P2.50mm_Horizontal | J8 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J10 |
| 1 | Conn_ST_STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J7 |
| 1 | LOGO | LogoEnsea:LogoEnsea | G*** |
| 1 | LOGO | LogoAres:logoares | G*** |
| 1 | R-78B5.0-2.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78B-2.0_THT | J11 |
| 1 | STM32L552CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | Driver1 |

CaptainJaja/Projet_1A_S6
Voici le projet de première année du deuxième semestre, pour le groupe Janus-Christophe-Raphaëlle


karimDouerfelli/cdf_pcb_rail-ventouse-servo
coupe de france cdf pcb de 4 couche dedie aux ventouse eu au rail et deux servomoteurs

AresEnsea/2526_Projet2A_AresCFR
Ce repository GitHub regroupe l'ensemble des projets et documents réalisés par l'équipe Ares pour la Coupe de France de Robotique 2026.

exysta/2425_ESE_Projet_TagBot
Vous vous trouvez actuellement dans le projet TagBot (ou robot chat), qui s'intègre à un projet de classe où chaque équipe doit concevoir un robot.


MohamedBenabdelhadi/2425_ESE_Projet_V-NOM
Mohamed Benabdelhadi_Nouhaila Faris_Oliver Belliard_Valerian Priou


Arlausea/2324_Projet2A_Eve
Upgrade of a robot arm to help disabled people in everyday life
It measures 63.4 × 41.1 mm and has 4 copper layers, 1.6 mm thick.
51 parts, built around the R-78B5.0-2.0 and BU33SD5WG-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CaptainJaja/Projet_1A_S6 repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/PCB_v2/PCB_projetV2.kicad_pcb and its schematic Hardware/PCB/PCB_v1/MCU_REGU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CaptainJaja before reusing the design.