

Opamp vu meter
All CASE christmas cards over the years
- Size
- 92.5 × 99.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 36
- Pads
- 131
- Tracks, vias
- 319, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jan 2021
- Updated
- 19 May 2025
Overview
Opamp vu meter is an open-source printed circuit board by CASE-Association, from the CASE-Association/christmas-cards repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 92.5 × 99.7 mm with 48 parts on 36 nets, routed with 319 tracks and 16 vias.
It is built around the TLC272CD and MM3Z4V3. Its parts include 16 resistors, 9 diodes, 5 capacitors, 5 ICs and 1 transistor.
Main components
2TLC272CD
SOIC-80.7pA 0℃~+70℃ 1.8uV/℃ 10mV 2 2.2MHz 25nV/√Hz@1kHz 3.6mA 300pA 30mA 3V~16V 5.3V/us 80dB ESD protection Rail-to-rail input SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierMM3Z4V3
SOD-3231 Independent 130Ω 300mW 4.3V 4V~4.6V 5uA@1V SOD-323 Zener Diodes ROHSSTMicroelectronicsZener Diodes
README
2021/opamp_vu_meter/README.mdThe 2021 version, with lights that blink with music!
Go to https://case-association.github.io/christmas-cards/index.html for interactive BOM.
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5, D6, D7, D8, D9 |
| 5 | TLC272 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U5 |
| 3 | 100k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R3, R5, R6 |
| 3 | 100n | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | C1, C2, C4 |
| 2 | 10k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R1, R8 |
| 2 | 1k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R4, R7 |
| 2 | R_Pack04 | opamp_vu_meter:R_Array_Convex_4x1206_long | RN1, RN2 |
| 1 | 1.1k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R16 |
| 1 | 1.6k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R15 |
| 1 | 10M | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R9 |
| 1 | 10uF | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | C5 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 2.2k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R14 |
| 1 | 220n | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | C3 |
| 1 | 3k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R13 |
| 1 | 4.3k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R12 |
| 1 | 43k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R18 |
| 1 | 6.2k | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R11 |
| 1 | 750R | opamp_vu_meter:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder_silkVal | R17 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LOGO | print:godjul | G*** |
| 1 | LOGO | print:eyes | G*** |
| 1 | LOGO | logo:case_head_17x10mm | G*** |
| 1 | MM3Z4V3 | Diode_SMD:D_SOD-123F | Z1 |
| 1 | Mic | SamacSys_Parts:CMA4544PFW | MK1 |
| 1 | Q_PNP_BCE | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | R_POT | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | Audiolevel_TP1 |
The 46 most common of 48 parts.
More from CASE-Association/christmas-cards
4- 2 layers80 × 100 mm

- 2 layers98.8 × 68 mm

- 2 layers49.1 × 95.9 mm

- 2 layers6.6 × 0.8 mm

Julkort Blank
CASE-Association/christmas-cards
All CASE christmas cards over the years
26 parts3GPL-3.0
Similar boards
- 2 layers75.5 × 52.5 mm

- 2 layers85 × 61 mm

- 2 layers200 × 87.8 mm

- 2 layers52.3 × 51.8 mm

- 2 layers50 × 40.9 mm

GR ATTiny LFO
GadgetReboot/ATTiny_LFO
Dual low frequency oscillators using ATTiny and MCP4725 DACs
36 parts3 - 2 layers56.5 × 74 mm

Ascom flat panel
letelescope/ascom-flat-panel
Open source ASCOM and INDI driven automated flat panel for astrophotography
17 parts2MIT - 2 layers43.5 × 46.9 mm

Schaltplan Ultraschallsensor
Tinkerforge/distance-us-v2-bricklet-techniker
This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators
54 parts2 - 2 layers85 × 56.5 mm

Questions
How big is the Opamp vu meter PCB?
It measures 92.5 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Opamp vu meter use?
48 parts, built around the TLC272CD and MM3Z4V3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Opamp vu meter KiCad files?
From the CASE-Association/christmas-cards repository on GitHub, at the commit this page was made from: the board is 2021/opamp_vu_meter/opamp_vu_meter.kicad_pcb and its schematic 2023/Julkort/Julkort.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Opamp vu meter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).