2 layers
2 layers343.2 × 297.3 mm
PixelFan LedLeiste
C3MA/PixelFan1Details und eine Präsentation dazu gibt es hier:
- Size
- 343.2 × 297.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 190
- Nets
- 223
- Pads
- 752
- Tracks, vias
- 1,928, 228
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Jan 2023
- Updated
- 16 Feb 2023
Overview
PixelFan LedLeiste is an open-source printed circuit board by C3MA, from the C3MA/PixelFan repository on GitHub. It is a 2-layer board of 343.2 × 297.3 mm with 190 parts on 223 nets, routed with 1,928 tracks and 228 vias.
It is built around the ESP-12F and 74HCT1G125GW. Its parts include 78 diodes, 54 capacitors, 13 resistors, 6 ICs and 4 inductors. It belongs with the ESP8266 and STM32 boards of this library.
Main components
2README
README.md
Projektbeschreibung
In diesem Projekt wurde ein Handelsüblicher Standventilator zum Rotationsdisplay umfunktioniert.
Details und eine Präsentation dazu gibt es hier:
Aufbau
Es gibt insgesamt 3 identische LED Leisten (PCB/LED_Leiste) mit jeweils 26 HD107S LEDs.
Die LED Leisten werden dann auf der Hauptplatine (PCB/PixelFan) bestückt.
Die Hauptplatine besteht aus 2 Controllern:
- ein STM32G071KBTX (Software unter STM_PixelFan) für die schnelle zeitkritische Ansteuerung der LEDs und der Synchronisation zur Drehung
- ein ESP32 (Software unter ESP_PixelFan) um per W-LAN eine Verbindung zur Außenwelt herzustellen
Der Ventilator öffnet ein W-LAN (SSID: PixelFan) auf dem er eine Website (unter 192.168.4.1) anzeigt. Auf der Seite können Bilder, Smileys und Text auf den Ventilator gesendet werden.
Parts
190| Qty | Value | Footprint | References |
|---|---|---|---|
| 78 | APA102 | LED_SMD:LED_RGB_5050-6 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +62 |
| 45 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +29 |
| 24 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA15, PB0, PB1, PB2, PB3, PB4, PB5, PB6 +8 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R8, R10, R14, R15, R16 |
| 4 | 470n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C5, C7, C53 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17, R18, R19 |
| 3 | 1u | Inductor_THT:L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L2, L3, L4 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C52 |
| 2 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C6 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R20 |
| 2 | 74HCT1G125GW | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U3, U4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D4.0mm | TP1, TP2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21 |
| 1 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | 470µF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 47µH | Inductor_THT:L_Radial_D12.5mm_P7.00mm_Fastron_09HCP | L1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | ESP-12F | RF_Module:ESP-12E | U9 |
| 1 | Flash | Button_Switch_SMD:SW_SPST_B3S-1000 | SW2 |
| 1 | LM397 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U11 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | STM32G070KxTx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
More from C3MA/PixelFan
2- 2 layers26 × 162 mm
Similar boards
- 4 layers127.5 × 51.5 mm
EMIsniffer
evabits/EMI_sniffer_beursgadget_WOTS_2026
Schematics. Layout and Firmware of the WOTS2026 beursgadget.
174 parts7MIT - 2 layers320.5 × 91 mm
- 2 layers149.4 × 97.1 mm
Moon knight v2 right copy
deeepanshu/moon_knight_kbd
A custom split keyboard project with multiple hardware iterations and utilities.
103 parts - 2 layers55 × 82.7 mm
- 2 layers51.4 × 61 mm
- 2 layers50 × 38 mm
- 2 layers33.7 × 66 mm
Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0 - 2 layers49.4 × 35.8 mm
WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes
22 parts82MIT
Questions
How big is the PixelFan LedLeiste PCB?
It measures 343.2 × 297.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PixelFan LedLeiste use?
190 parts, built around the ESP-12F and 74HCT1G125GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PixelFan LedLeiste KiCad files?
From the C3MA/PixelFan repository on GitHub, at the commit this page was made from: the board is PCB/PixelFan_LedLeiste.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PixelFan LedLeiste design in my own project?
Its repository states no licence, so its author keeps all rights: ask C3MA before reusing the design.