Skip to the content
2 layers37.5 × 65 mmMouse1-1, the printed circuit board in 3D

My manual remake of the EOL XM102K mouse PCB in KiCAD. GERBER and DRILL files included.

Size
37.5 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
13
Pads
44
Tracks, vias
111, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Jul 2026
Updated
9 Jul 2026

Overview

Mouse1-1 is an open-source printed circuit board by C0m3b4ck, from the C0m3b4ck/XM102K-Mouse repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 37.5 × 65 mm with 18 parts on 13 nets, routed with 111 tracks and 0 vias.

Its parts include 3 capacitors, 2 resistors, 2 diodes and 1 IC.

README

README.md

XM102K Mouse in KiCAD

@PrinterFixer [Video title here](VIDEO HERE - IF THERE IS NONE THEN IT IS NOT DONE)

KiCAD project with GERBER and DRILL files of the XM102K mouse PCB from 2012/02/03, remade manually by me, C0m3b4ck. All models of all components are in place, the PCB is of accurate size. The only inacurracies are the connections, which aren't 1:1 to the actual PCB. The microswitch and the rotary encoder are the exact same but from different companies (couldn't find original companies).

The mouse PCB is from 2012/02/03. It is end-of-life and comes from an unknown Chinese manufacturer.

Capabilities

From the MX8733B documentation:

  • Optical Navigation Technology
  • Universal Serial Bus Specification, version 2.0
  • USB HID Specification, version 1.1
  • USB-IF and WHQL compliable
  • 5V Power Supply
  • Power saving during no motion
  • On chip LED drive with regulated current
  • Crystal-less
  • 1000CPI resolution (Counts per Inch)
  • Low electromagnetic inference radiation
  • Supports 3D (X, Y, Z) input
  • Supports 3 buttons and mechanical wheel encoding

GERBER, DRILL and BOM (click to download)

Components:

Repository layout

  • DOCS/ — component datasheets and board photos.
  • mouse1/mouse1/mouse1-1/mouse1-1.kicad_pro - project file.
  • XM102K-GERBER-DRILL.7z — archived Gerber/drill package.
  • Xtreme-XM102K/ — KiCAD project files - models, footprints, symbols, schematic and PCB.

Images

Virtual PCB underside
PCB 3D view in KiCAD - underside.
Virtual PCB top
PCB 3D view in KiCAD - top view.
Virtual PCB left
PCB 3D view in KiCAD - left.
Virtual PCB right
PCB 3D view in KiCAD - right.
PCB underside
The underside of the PCB.
PCB top view
View of the PCB from top.
PCB left view
View of the PCB from the left.
PCB right view
View of the PCB from the right.
Stock board overview
The mouse case, stock photo.
Full case and cable from top
Full mouse case and cable view from top.
Schematic 1
Schematic divided into sections.
Schematic 2
Schematic of full circuit.

Credits

Project made manually by me on 7/07/2026.

Purpose

This repository preserves the complete investigation of the XM102K mouse hardware: project files, documentation and images. It is intended as a technical reference for anyone analyzing, repairing, or getting inspired by the XM102K design and the MX8733B-based optical mouse architecture.

Parts

18
QtyValueFootprintReferences
3~SmallCapacitor:SmallCapacitorC1, C2, C3
2~D2FT:D2FT_SWSWL, SWR
168 ohmResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1LEDLED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmLED1
1RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_VerticalR2
1SW_Push2pin_btn:SW_PUSH_6mm_h7.3mmSWM1
1VCC_LEDLED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmD2
1~MX8733B:MX8733B ICU1
1~AlpineRotaryEncoder:AlpineRotaryEncoderENC1
1~USB_direct_wire:USB_diredt_wireUSB1

The 13 most common of 18 parts.

Similar boards

  • 2 layers27.9 × 16.5 mmPowerSSO-24 breakout, the printed circuit board in 3D

    PowerSSO-24 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    18 parts1.2k
  • 2 layers42.7 × 13.7 mmStm32-mini12864, the printed circuit board in 3D

    Stm32-mini12864

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    18 parts1.1kGPL-3.0
  • 2 layers41.2 × 46.6 mmThumb cluster left, the printed circuit board in 3D

    Thumb cluster left

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    18 parts993
  • 2 layers44 × 51.3 mm4272MAVcoder R4, the printed circuit board in 3D

    4272MAVcoder R4

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    18 parts915
  • 2 layers28.3 × 14.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    18 parts716GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 stepper driver, the printed circuit board in 3D

    L0 stepper driver

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    18 parts546MIT
  • 2 layersMooltipass, the printed circuit board in 3D

    Mooltipass

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    18 parts531
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V2, the printed circuit board in 3D

    C5VRX JACK DIY V2

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0

Questions

How big is the Mouse1-1 PCB?

It measures 37.5 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mouse1-1 use?

18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mouse1-1 KiCad files?

From the C0m3b4ck/XM102K-Mouse repository on GitHub, at the commit this page was made from: the board is mouse1/mouse1-1/mouse1-1.kicad_pcb and its schematic mouse1/mouse1-1/_restore_backup_2026-07-08T17-19-25-067/mouse1-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mouse1-1 design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).