
PREAMP PCB
ByTechLab/RF---Mostly-3D-Printed-Discone-Antenna--0.08-1-GHz-
Mostly 3D printed discone antenna for Software Definied Radio.

Mostly 3D printed discone antenna for Software Definied Radio.
BIAS TEE PCB is an open-source printed circuit board by ByTechLab, from the ByTechLab/RF---Mostly-3D-Printed-Discone-Antenna--0.08-1-GHz- repository on GitHub. It is a 2-layer board of 43 × 24 mm with 24 parts on 12 nets, routed with 66 tracks and 288 vias.
It is built around the WA8514-AE, CG775MS and 0ZCJ0025AF2E, with the RF2-143-T-17-50-G, USB4105-GF-A and CGA0603MLC-05E among its other parts. Its parts include 8 resistors, 5 capacitors, 3 connectors, 1 inductor and 1 fuse.
Mostly 3D printed discone antenna for Software Definied Radio.
![]() | https://bytechlab.com/2018/05/mostly-3d-printed-discone-antenna/ |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | , , , | ||
| 4 | NC | PCB_LIB:R_NC_0402_1005 | R5, R6, R7, R8 |
| 2 | 100n | PCB_LIB:C_0402_1005 | C3, C4 |
| 2 | 1M | PCB_LIB:R_0402_1005 | R3, R4 |
| 2 | 5.1k | PCB_LIB:R_0402_1005 | R1, R2 |
| 1 | 100n | PCB_LIB:C_0603_1608 | C1 |
| 1 | 10n | PCB_LIB:C_0603_1608 | C5 |
| 1 | 1u | PCB_LIB:C_0603_1608 | C2 |
| 1 | 5.6uH | PCB_LIB:L_RF_5.6uH_4.4x2mm_WA8514-AE | L1 |
| 1 | ~ | PCB_LIB:J_132366 | J2 |
| 1 | ~ | PCB_LIB:GDT_CG775MS | GDT1 |
| 1 | ~ | PCB_LIB:F_250mA_24V_1206 | F1 |
| 1 | ~ | PCB_LIB:J_RF2-143-T-17-50-G | J3 |
| 1 | ~ | PCB_LIB:J_USB_C_USB4105 | J1 |
| 1 | ~ | PCB_LIB:R_0603_1608 | TVS1 |

ByTechLab/RF---Mostly-3D-Printed-Discone-Antenna--0.08-1-GHz-
Mostly 3D printed discone antenna for Software Definied Radio.

antmicro/vna-se-probe
PCB design for a PCB needle probe that can be used with Vector Networ Analyzers




sq9nje/matrix_antenna_switch
A 2x6 matrix antenna switch for HF HAM radio

ondras12345/multicdc
RP2040-based 6-channel USB to UART converter with Zephyr RTOS

ondras12345/vetrnik
Electronics for heating water with power from a 2 kW wind turbine

It measures 43 × 24 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the WA8514-AE, CG775MS, 0ZCJ0025AF2E and RF2-143-T-17-50-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ByTechLab/RF---Mostly-3D-Printed-Discone-Antenna--0.08-1-GHz- repository on GitHub, at the commit this page was made from: the board is PROJECT_FILES/ECAD/15_DISCONE_V4/4_BIAS_TEE_PCB_KICAD/BIAS_TEE_PCB.kicad_pcb and its schematic PROJECT_FILES/ECAD/15_DISCONE_V4/1_DISC_PCB_KICAD/DISC_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ByTechLab before reusing the design.