Skip to the content
2 layers75 × 41.5 mmTyre temp sense, the printed circuit board in 3D

Tyre temperature monitoring sensors/arduino projcet

Size
75 × 41.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
64
Pads
160
Tracks, vias
307, 16
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 Jul 2021
Updated
30 Sep 2021

Overview

Tyre temp sense is an open-source printed circuit board by Bryce-AC, from the Bryce-AC/AUMT-Temp-Sense repository on GitHub. It is a 2-layer board of 75 × 41.5 mm with 38 parts on 64 nets, routed with 307 tracks and 16 vias.

It is built around the MCP2551-I/SN-HG and MCP2515-I/ST. Its parts include 14 resistors, 9 connectors, 4 capacitors, 3 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

AUMT Temp Sense

Tyre temperature monitoring sensors/arduino projcet

Parts

38
QtyValueFootprintReferences
104.7KResistor_SMD:R_0603_1608MetricR2, R3, R4, R5, R6, R7, R8, R9, R10, R11
310KResistor_SMD:R_0603_1608MetricR1, R12, R13
230pFCapacitor_SMD:C_0603_1608MetricC1, C2
2GNDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8, J9
110uFCapacitor_SMD:C_0603_1608MetricC3
1120Resistor_SMD:R_1206_3216MetricR14
11uFCapacitor_SMD:C_0603_1608MetricC4
18 mhzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
1AConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1MCP2515-I/STPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU2
1MCP2551-I-SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1MUX Port 0Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ2
1MUX Port 1Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ3
1MUX Port 2Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ4
1MUX Port 3Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ5
1POWER & CANConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ1
1RXTestPoint:TestPoint_Pad_D1.5mmTP8
1TCA9548APWRPackage_SO:TSSOP-24_4.4x7.8mm_P0.65mmU1
1TXTestPoint:TestPoint_Pad_D1.5mmTP9

The 34 most common of 38 parts.

Similar boards

  • 4 layers137.2 × 61.6 mmVCU2.0, the printed circuit board in 3D

    VCU2.0

    milutintech/LADA

    VCU for Lada Niva

    94 parts1
  • 2 layers49.5 × 111.8 mmUniversal can board, the printed circuit board in 3D

    Universal can board

    franc0r/universal_can_board

    Contains schematic, pcb layout and software of the francor's universal can board.

    70 partsBSD-3-Clause
  • 4 layers128.4 × 70.8 mmVCU3.0, the printed circuit board in 3D

    VCU3.0

    Obili69/E-GoCart

    Vehicle Control Unit (VCU) firmware for an electric go-kart, built on ESP32-S3 with FreeRTOS. Manages motor control, battery management, charging, telemetry, and safety systems over dual CAN buses.

    109 parts
  • 4 layers70 × 35 mmTempWatchtV1, the printed circuit board in 3D

    TempWatchtV1

    steiger-systems/TempWatch

    65 parts
  • 2 layers84.4 × 56.8 mmRPi Hat, the printed circuit board in 3D

    RPi Hat

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    131 parts4Apache-2.0
  • 2 layers69 × 100 mmEKCP RP, the printed circuit board in 3D

    EKCP RP

    Konstantin-Dudersky/plc-modules

    После открыть файл в Inkscape и изменить размер страницы

    49 parts

Questions

How big is the Tyre temp sense PCB?

It measures 75 × 41.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tyre temp sense use?

38 parts, built around the MCP2551-I/SN-HG and MCP2515-I/ST. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tyre temp sense KiCad files?

From the Bryce-AC/AUMT-Temp-Sense repository on GitHub, at the commit this page was made from: the board is pcb/tyre_temp_sense/tyre_temp_sense.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tyre temp sense design in my own project?

Its repository states no licence, so its author keeps all rights: ask Bryce-AC before reusing the design.