2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers36.2 × 26 mm
TinyRFID
Brandon2255p/TinyRFID2The full project for the TinyRFID PCB design and source code
- Size
- 36.2 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 10
- Pads
- 41
- Tracks, vias
- 80, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Dec 2017
- Updated
- 12 Dec 2017
Overview
TinyRFID is an open-source printed circuit board by Brandon2255p, from the Brandon2255p/TinyRFID repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 36.2 × 26 mm with 11 parts on 10 nets, routed with 80 tracks and 0 vias.
It is built around the ATTINY85-20SU. Its parts include 3 switches, 2 resistors, 2 transistors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdTinyRFID
The full project for the TinyRFID PCB design and source code
To Checkout:
git clone --recursive https://github.com/Brandon2255p/TinyRFID.gitParts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 1K | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | ATTINY85-20SU | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | Battery_Cell | Battery:Embedded_CR2032 | BT1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch1.27mm | J1 |
| 1 | Conn_01x06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.00mm | J2 |
| 1 | SW_1 | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | SW_2 | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW2 |
| 1 | SW_3 | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW3 |
Similar boards
- 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28
Questions
How big is the TinyRFID PCB?
It measures 36.2 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TinyRFID use?
11 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinyRFID KiCad files?
From the Brandon2255p/TinyRFID repository on GitHub, at the commit this page was made from: the board is KiCad/tiny-rfid.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinyRFID design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).