4 layers160 × 100 mm
2 layers63 × 20 mm
ESP32CAM POWER
Bouni/ESP32CAM-POWERA small PCB that allows me to power the ESP32 CAM boards from 24VDC
- Size
- 63 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 37
- Pads
- 116
- Tracks, vias
- 116, 27
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Aug 2021
- Updated
- 21 Oct 2024
Overview
ESP32CAM POWER is an open-source printed circuit board by Bouni, from the Bouni/ESP32CAM-POWER repository on GitHub. It is a 2-layer board of 63 × 20 mm with 43 parts on 37 nets, routed with 116 tracks and 27 vias.
It is built around the ESP32-CAM, TSR 1-2450SM and CH340X, with the XL-1010RGBC-WS2812B-DZ and 1N5819WS among its other parts. Its parts include 7 capacitors, 7 diodes, 5 resistors, 2 ICs and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5
ESP32-CAM
插件插件 WiFi Modules ROHSAi-ThinkerWiFi Modules
TSR 1-2450SM
SMD-6P,15.2x9.3mm-40℃~+85℃ 1 1A 1mA 470uF 500kHz 5V 6.5V~36V 75mVp-p 94% Buck Short Circuit Protection ±2% SMD-6P,15.2x9.3mm DC-DC Power Modules ROHSTRACO POWERDC-DC Power Modules
CH340X
MSOP-10-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial、USB to Parallel MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersXL-1010RGBC-WS2812B-DZ
SMD1010SMD1010 SMT ROHSXINGLIGHTUncategorised
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
README
README.mdESP32-CAM POWER BOARD
This board is meant to act as a carrier board for an ESP32-CAM Module taht supplies it with power and allows for up to 24VDC supply voltage.
The DC-DC converter board used is of AliExpress.
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6 |
| 4 | XL-1010RGBC-WS2812B | LCSC:LED-SMD_4P-L1.0-W1.0-TL_XL-1010RGBC-WS2812B | LED1, LED2, LED3, LED4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 3 | ToolingHole | JLCPCB:ToolingHole | TH, TH, TH |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2 |
| 2 | SW_Omron_B3S | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1, SW2 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C7 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D3 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 680 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | CH340X | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | ESP32-CAM | bouni:ESP32-CAM | U2 |
| 1 | G*** | kibuzzard-66C8202D | kibuzzard-66C8202D |
| 1 | G*** | kibuzzard-66CDCC8A | kibuzzard-66CDCC8A |
| 1 | G*** | kibuzzard-66CDCC95 | kibuzzard-66CDCC95 |
| 1 | G*** | kibuzzard-66C81FD1 | kibuzzard-66C81FD1 |
| 1 | G*** | kibuzzard-66C75903 | kibuzzard-66C75903 |
| 1 | G*** | kibuzzard-66C7590B | kibuzzard-66C7590B |
| 1 | G*** | kibuzzard-66C82011 | kibuzzard-66C82011 |
| 1 | G*** | kibuzzard-66C81FE3 | kibuzzard-66C81FE3 |
| 1 | G*** | kibuzzard-66CDCC90 | kibuzzard-66CDCC90 |
| 1 | LED_B | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED_G | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Screw_Terminal_01x02 | SPTAF1:1861933 | J1 |
| 1 | TSR_1-2450SM | TRACO-TSR1:TSR124120SM | PS1 |
| 1 | USB_C_Receptacle_USB2.0_16P | LCSC:USB-C-SMD_TYPE-C-6PIN-2MD-073 | J2 |
Similar boards
- 2 layers18.7 × 51.9 mm
- 4 layers52.5 × 80 mm
- 2 layers52.8 × 55 mm
ILDAWaveX16
stanleyondrus/ILDAWaveX16
ILDAWaveX16 is an open-source, high-resolution, wireless laser DAC with SD-card playback, network control, and ILDA output.
95 parts42 - 2 layers30 × 30 mm
SoundMixer
LeKoYa/SoundMixer
A deej-powered Soundmixer for individual volume control with rotary encoders, leds, buttons and oled support
41 parts41MIT - 2 layers111.2 × 210.4 mm
- 8 layers35 × 35 mm
OpenAIO
OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.
343 parts19CERN-OHL-S-2.0 - 6 layers17 × 15.7 mm
OpenRX Gemini
OpenDrone-hw/OpenRX-Gemini
Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.
86 parts11CERN-OHL-S-2.0
Questions
How big is the ESP32CAM POWER PCB?
It measures 63 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32CAM POWER use?
43 parts, built around the ESP32-CAM, TSR 1-2450SM, CH340X and XL-1010RGBC-WS2812B-DZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32CAM POWER KiCad files?
From the Bouni/ESP32CAM-POWER repository on GitHub, at the commit this page was made from: the board is ESP32CAM-POWER.kicad_pcb and its schematic ESP32CAM-POWER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32CAM POWER design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bouni before reusing the design.