Skip to the content
2 layers18.7 × 51.9 mmFire-40-b, the printed circuit board in 3D

A variant of the 40 pin version. Adds a neo-pixel LED..

Size
18.7 × 51.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
79
Pads
283
Tracks, vias
1,359, 85
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Sep 2026
Updated
27 Sep 2026

Overview

Fire-40-b is an open-source printed circuit board by fezzo2003, from the fezzo2003/onerom-honda repository on GitHub. It is a 2-layer board of 18.7 × 51.9 mm with 50 parts on 79 nets, routed with 1,359 tracks and 85 vias.

It is built around the RP2354B, W25Q16JVSSIQ and AP2112K-3.3, with the USBLC6-2P6, 1N5819WS and XL-1010RGBC-WS2812B-DZ among its other parts. Its parts include 23 capacitors, 13 resistors, 5 ICs, 4 diodes and 3 connectors. It belongs with the RP2350 boards of this library.

Main components

6

README

hardware/pcb/verified/fire-40-b/README.md

Fire 40 Rev B

A variant of the 40 pin version. Adds a neo-pixel LED..

Has components on both sides of the board.

Changes from fire-40-a:

  • Adds a neo-pixel LED, GPIO 44, alongside the status LED at GPIO 45 (which changed for consistency with other RP235XB based boards).
  • Address and CS pins have been laid out differently to allow more efficient use of flash for some image types.

Parts

50
QtyValueFootprintReferences
120.1uFCapacitor_SMD:C_0402_1005MetricC4, C5, C6, C8, C9, C10, C11, C12, C14, C20, C21, C22
74.7uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C7, C13, C15, C23
410KResistor_SMD:R_0402_1005MetricR1, R3, R7, R8
41KResistor_SMD:R_0402_1005MetricR2, R5, R6, R13
215pFCapacitor_SMD:C_0402_1005MetricC18, C19
21N5819WSDiode_SMD:D_SOD-323D2, D3
24.7uFRP2350_60QFN_minimal:C_0402_1005Metric_small_padsC16, C17
25K1Resistor_SMD:R_0402_1005MetricR9, R10
10RResistor_SMD:R_0402_1005MetricR12
13.3uRP2350_60QFN_minimal:L_pol_2016L1
133RResistor_SMD:R_0402_1005MetricR4
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U3
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1Conn_02x04_Odd_Evenpiers footprints:PinHeader_2x04_P2.54mm_Vertical custom silkscreenJ2
1Conn_02x20_Counter_Clockwisepiers retro:2x20 dip pin output 600mil centresU2
1Crystal_GND24Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY1
1DNPResistor_SMD:R_0402_1005MetricR11
1LED_SmallLED_SMD:LED_0603_1608MetricD1
1RP2354BRP2350B:RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalViasU1
1USBLC6-2P6Package_TO_SOT_SMD:SOT-666U4
1USB_C_Receptacle_USB2.0_16Ppiers retro footprints:USB_C_connector_c2765186J1
1W25Q16JVSSPackage_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mmU5
1XL-1010RGBC-WS2812Bpiers retro:XL-1010RGBC-2812BD4

More from fezzo2003/onerom-honda

3
  • 2 layers18.9 × 36.6 mmFire-28-c, the printed circuit board in 3D

    Fire-28-c

    fezzo2003/onerom-honda

    A variant of the 40 pin version. Adds a neo-pixel LED..

    46 parts
  • 2 layers18.3 × 31.3 mmFire-24-f, the printed circuit board in 3D

    Fire-24-f

    fezzo2003/onerom-honda

    A variant of the 40 pin version. Adds a neo-pixel LED..

    44 parts
  • 2 layers18.9 × 36.7 mmFire-28-a3, the printed circuit board in 3D

    Fire-28-a3

    fezzo2003/onerom-honda

    A variant of the 40 pin version. Adds a neo-pixel LED..

    42 parts

Similar boards

  • 2 layers18.9 × 41.7 mmFire-32-a, the printed circuit board in 3D

    Fire-32-a

    johanputzolu-cmd/Onerom

    The most flexible ROM replacement for your retro computer. It is highly configurable and low-cost. Get them fabbed at JLC for under $5 each in a quantity of 10 or more.

    48 parts
  • 6 layers42.8 × 66.3 mmPlant Monitor, the printed circuit board in 3D

    Plant Monitor

    C-yue28/Plant-Monitor

    ML-powered plant monitor, tracking metrics such as temperature, humidity, soil moisture, etc to inform plant watering behavior.

    59 parts
  • 4 layers52.8 × 61.2 mmGameboyCartridgeV2.1, the printed circuit board in 3D

    GameboyCartridgeV2.1

    shilga/rp-gameboy-cartridge-hw

    You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.

    81 parts72CERN-OHL-P-2.0
  • 2 layers21 × 49.5 mmHackducky, the printed circuit board in 3D

    Hackducky

    hackclub/hackducky

    The hackclub themed USB rubber ducky ! - Check out hackducky

    51 parts33
  • 4 layers73 × 41 mmBadge, the printed circuit board in 3D

    Badge

    souptik-samanta/Pcb-Badge

    63 parts4MIT
  • 2 layers18.9 × 31.6 mmRp2350-24-pin rev b, the printed circuit board in 3D

    Rp2350-24-pin rev b

    schenkmi/electronic-projects

    misc electronic projects

    48 parts6CERN-OHL-W-2.0
  • 2 layers73 × 41 mmBadge, the printed circuit board in 3D

    Badge

    hackclub/reflow

    A YSWS for the northern hemisphere's summer and the aussie's winter. Run by @pmnlla, with love and loads of carrots.

    68 parts2
  • 2 layers63 × 20 mmESP32CAM POWER, the printed circuit board in 3D

    ESP32CAM POWER

    Bouni/ESP32CAM-POWER

    A small PCB that allows me to power the ESP32 CAM boards from 24VDC

    43 parts

Questions

How big is the Fire-40-b PCB?

It measures 18.7 × 51.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fire-40-b use?

50 parts, built around the RP2354B, W25Q16JVSSIQ, AP2112K-3.3 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fire-40-b KiCad files?

From the fezzo2003/onerom-honda repository on GitHub, at the commit this page was made from: the board is hardware/pcb/verified/fire-40-b/fire-40-b.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fire-40-b design in my own project?

Its repository states no licence, so its author keeps all rights: ask fezzo2003 before reusing the design.