Skip to the content
2 layers40 × 20 mmB I2C HUB BRK R1.0, the printed circuit board in 3D

Boardoza I²C Hub is a compact passive module that distributes a single I²C bus to multiple connectors for easy multi-device integration.

Size
40 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
5
Pads
36
Tracks, vias
21, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 Jul 2026
Updated
5 Aug 2026

Overview

B I2C HUB BRK R1.0 is an open-source printed circuit board by Boardoza, from the Boardoza/Boardoza_I2C_Hub_I2C_Bus_Distribution_Module repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 40 × 20 mm with 10 parts on 5 nets, routed with 21 tracks and 0 vias.

It is built around the LTST-C191KRKT. Its parts include 8 connectors, 1 resistor and 1 diode. It belongs with the microcontroller boards and interfaces and adapters boards of this library.

Main components

1

README

README.md

Boardoza I²C Hub Module

The Boardoza I²C Hub is a compact passive distribution module designed to simplify the connection of multiple I²C devices to a single microcontroller or development board. It distributes the four essential I²C signals—VCC, GND, SDA, and SCL—across multiple connectors, making it easy to build multi-device I²C systems without complex wiring or large breadboard setups.

Compatible with Arduino, Raspberry Pi, ESP32, STM32, and other I²C-capable platforms, the Boardoza I²C Hub is ideal for projects involving multiple sensors, OLED displays, real-time clocks, EEPROMs, environmental monitoring modules, and other I²C peripherals. Since all connectors share the same I²C bus, the board provides a simple and reliable way to expand I²C connectivity while keeping wiring clean and organized.

Click here to purchase!

Front SideBack Side
I²C Hub FrontI²C Hub Back

Key Features

  • Simple I²C Expansion: Connect up to four I²C modules using dedicated connectors.
  • Parallel Bus Distribution: Shares VCC, GND, SDA, and SCL across every connector.
  • Breadboard Alternative: Keeps wiring clean and organized in multi-sensor projects.
  • Plug-and-Play Design: No drivers, firmware, or software configuration required.
  • Power Indicator LED: Easily confirms that supply voltage is present.
  • Wide Platform Compatibility: Works with Arduino, Raspberry Pi, ESP32, STM32, and other I²C-enabled controllers.

Technical Specifications

Model: I²C Hub
Manufacturer: Boardoza
Board Type: Passive I²C Distribution Module
Input Voltage: Determined by the connected controller and I²C peripherals
Connection Types: 4-pin I²C connectors and 2.54mm header pins
Functions: I²C Power and Signal Distribution
Communication Protocol: I²C (Pass-through)
Distributed Signals: VCC, GND, SDA, SCL
Dedicated I²C Connectors: 4
Header Connections: 4 (Parallel)
Bus Architecture: Passive Parallel Distribution
Operating Temperature: -55°C to +85°C
Board Dimensions: 40mm × 20mm


Board Pinout

( J1 ) I²C Connector

Pin NumberPin NameDescription
1VCCSupply voltage for connected I²C devices
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

( J2 ) I²C Connector

Pin NumberPin NameDescription
1VCCSupply voltage for connected I²C devices
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

( J3 ) I²C Connector

Pin NumberPin NameDescription
1VCCSupply voltage for connected I²C devices
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

( J4 ) I²C Connector

Pin NumberPin NameDescription
1VCCSupply voltage for connected I²C devices
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

( J5 ) Header Connection

Pin NumberPin NameDescription
1VCCSupply voltage
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

( J6 ) Header Connection

Pin NumberPin NameDescription
1VCCSupply voltage
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

( J7 ) Header Connection

Pin NumberPin NameDescription
1VCCSupply voltage
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

( J8 ) Header Connection

Pin NumberPin NameDescription
1VCCSupply voltage
2SCLI²C Serial Clock
3SDAI²C Serial Data
4GNDGround

Important Usage Notes

  • All SDA pins are electrically connected.
  • All SCL pins are electrically connected.
  • All VCC pins are electrically connected.
  • All GND pins are electrically connected.
  • Every connected I²C device must have a unique I²C address.
  • Devices with identical fixed addresses cannot communicate simultaneously on the same bus.
  • The board does not provide address translation, bus multiplexing, buffering, or voltage level shifting.
  • When connecting multiple modules with onboard pull-up resistors, verify the total pull-up resistance of the bus.
  • Excessive cable length or bus capacitance may reduce communication reliability, especially at higher I²C clock frequencies.

Board Dimensions

Board Dimensions

Step Files

Boardoza I²C Hub.step


Datasheet

This product is a passive PCB distribution board and does not contain an active integrated circuit. Therefore, no dedicated device datasheet is required.


Version History

  • V1.0.0 - Initial Release

Support


License

Hardware Design

CC BY-SA 4.0

All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.

Parts

10
QtyValueFootprintReferences
4Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5, J6, J7, J8
4MOLEX_CONNECTOR_1X4Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ1, J2, J3, J4
1330RResistor_SMD:R_0603_1608MetricR1
1POWERLED_SMD:LED_0603_1608MetricD1

Similar boards

  • 4 layers110 × 64 mmSYCL Badge 2024, the printed circuit board in 3D

    SYCL Badge 2024

    ZigEmbeddedGroup/sycl-badge

    The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/

    145 parts39
  • 4 layers27 × 27 mmO32controller, the printed circuit board in 3D

    O32controller

    qwertpas/O32controller

    Miniature closed-loop controller for brushless DC motors

    126 parts37MIT
  • 4 layers108 × 69 mmFmc2sata, the printed circuit board in 3D

    Fmc2sata

    antmicro/fmc-sata-adapter

    Adapter board exposing SATA M.2 SSD on FMC board-to-board connector

    65 parts17Apache-2.0
  • 4 layers70 × 100 mmEDUEXO custom PCB, the printed circuit board in 3D

    EDUEXO custom PCB

    fabianjust/classroom-exo

    Classroom-ready open-source educational exoskeleton for biomedical and control engineering

    75 parts6
  • 4 layers95 × 67 mmLoRaDongle iCE40, the printed circuit board in 3D

    LoRaDongle iCE40

    marrrk/LoRaDongle

    A Risc-V Based LoRa custom PCB

    145 parts4
  • 2 layers116 × 31 mmOpengeiger, the printed circuit board in 3D

    Opengeiger

    fredriknk/eikgeiger

    IOT Geigercounter for workshop

    96 parts3MIT
  • 4 layers80.5 × 50 mmBwlc1a, the printed circuit board in 3D

    Bwlc1a

    teapotlaboratories/bwlc1a

    Low-power Cellular GPS Tracker

    178 parts2MIT
  • 4 layers97 × 105.5 mmSTARDRIVE SHIELD V1 0, the printed circuit board in 3D

    STARDRIVE SHIELD V1 0

    themarcolab/Stardrive-Shield

    With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.

    193 parts2

Questions

How big is the B I2C HUB BRK R1.0 PCB?

It measures 40 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the B I2C HUB BRK R1.0 use?

10 parts, built around the LTST-C191KRKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the B I2C HUB BRK R1.0 KiCad files?

From the Boardoza/Boardoza_I2C_Hub_I2C_Bus_Distribution_Module repository on GitHub, at the commit this page was made from: the board is hardware files/B-I2C HUB-BRK-R1.0.kicad_pcb and its schematic hardware files/B-I2C HUB-BRK-R1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the B I2C HUB BRK R1.0 design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).