
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

Project led is an open-source printed circuit board by Bhavithravanan24, from the Bhavithravanan24/LIFI_GERBER repository on GitHub. It is a 2-layer board of 158.1 × 133.4 mm with 5 parts on 34 nets, routed with 52 tracks and 0 vias.
It is built around the ARDUINO UNO R3. It belongs with the AVR (ATmega, ATtiny) boards of this library.
here the gerber file of my project's pcb and also schematics and other files will be available
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | HY1602E | Display:HY1602E | DS1 |
| 1 | R_Photo | OptoDevice:R_LDR_D20mm_P17.5mm_Vertical | R1 |

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno

jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4


ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

It measures 158.1 × 133.4 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bhavithravanan24/LIFI_GERBER repository on GitHub, at the commit this page was made from: the board is project_led.kicad_pcb and its schematic project_led.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Bhavithravanan24 before reusing the design.