2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers57 × 53.8 mm
ProgrammerShield
Bartosz-Woj/Arduino-Programming-ShieldKiCad project of Arduino Shield used for programming AVR (Arduino as ISP).
- Size
- 57 × 53.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 44
- Pads
- 119
- Tracks, vias
- 154, 155
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Apr 2026
- Updated
- 23 Apr 2026
Overview
ProgrammerShield is an open-source printed circuit board by Bartosz-Woj, from the Bartosz-Woj/Arduino-Programming-Shield repository on GitHub, published under the MIT licence. It is a 2-layer board of 57 × 53.8 mm with 28 parts on 44 nets, routed with 154 tracks and 155 vias.
It is built around the ARDUINO UNO R3. Its parts include 9 connectors, 8 resistors, 6 diodes and 3 switches. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdArduino Programming Shield
Project Description
Arduino shield used for simplifying usage Arduino as ISP.
Main functionality
- IDC connectors with USB-ASP pinout
- additional LED
- additional buttons
Photos
- Main schematic:
- PCB:
Project status
Finished
Author
- Project by: Bartosz-Woj (Bartosz Wojciechowski)
- Date: 10.11.2025
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k | Library:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 6 | LED | Library:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6 |
| 5 | Conn_01x02_Pin | Library:PinHeader_1x02_P2.54mm_Vertical | J2, J4, J5, J7, J9 |
| 3 | SW_Push | Library:SW_PUSH_6mm | SW1, SW2, SW4 |
| 2 | 10k | Library:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8 |
| 2 | Conn_02x05_Odd_Even | Library:IDC-Header_2x05_P2.54mm_Vertical | J1, J6 |
| 1 | Arduino_UNO_R3 | Library:Arduino_UNO_R3_WithMountingHoles | A1 |
| 1 | Conn_01x04_Socket | Library:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_02x03_Odd_Even | Library:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | R_Potentiometer | Library:Potentiometer_Piher_PC-16_Single_Horizontal | RV1 |
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
Questions
How big is the ProgrammerShield PCB?
It measures 57 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ProgrammerShield use?
28 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProgrammerShield KiCad files?
From the Bartosz-Woj/Arduino-Programming-Shield repository on GitHub, at the commit this page was made from: the board is ProgrammerShield.kicad_pcb and its schematic ProgrammerShield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProgrammerShield design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).