
Hardware safecopy
Bananek96/BigPower
Projekt na Technologie Elektroniki Mocy i Wysokie Częstotliwości

Projekt na Technologie Elektroniki Mocy i Wysokie Częstotliwości
BigPower is an open-source printed circuit board by Bananek96, from the Bananek96/BigPower repository on GitHub. It is a 2-layer board of 140 × 180 mm with 43 parts on 85 nets, routed with 347 tracks and 501 vias.
It is built around the IR2102PBF, 1N4148WT and C4D02120A. Its parts include 12 capacitors, 11 resistors, 4 ICs, 4 transistors and 4 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | Resistor_SMD:R_1210_3225Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 |
| 4 | 100uF | Capacitor_SMD:CP_Elec_10x10 | C14, C19, C20, C22 |
| 4 | NMOS | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | Q5, Q6, Q7, Q8 |
| 3 | C | Capacitor_SMD:C_1206_3216Metric | C1, C17, C18 |
| 2 | 1N4148WT | Diode_SMD:D_MiniMELF | D4, D6 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric | C13, C23 |
| 2 | 500pF | Capacitor_SMD:C_1206_3216Metric | C16, C21 |
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_01x19 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J3, J4 |
| 2 | IR2102 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U8, U9 |
| 2 | U wyj | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 1 | +48V Vcc | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H3 |
| 1 | 10R | Resistor_SMD:R_1210_3225Metric | R9 |
| 1 | 1nF | Capacitor_SMD:C_1206_3216Metric | C12 |
| 1 | 5uH | Inductor_SMD:L_6.3x6.3_H3 | L2 |
| 1 | C4D02120A | Package_TO_SOT_THT:TO-220-2_Vertical | D5 |
| 1 | GND | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H4 |
| 1 | LM7803 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | U11 |
| 1 | TLV379IDR | Package_TO_SOT_SMD:SOT-23-5 | U10 |

Bananek96/BigPower
Projekt na Technologie Elektroniki Mocy i Wysokie Częstotliwości

erdemcanaz/3-Phase-BLDC-driver
A storyline of designing ~400Watt sensored brushless DC motor driver.



shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.


todbot/macropadsynthplug
Turn StemmaQT port by into Audio Out + MIDI In

acha666/RP2040_ToolheadPCB_SB
A Toolhead PCB for VORON StealthBurner based on RP2040
It measures 140 × 180 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the IR2102PBF, 1N4148WT and C4D02120A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bananek96/BigPower repository on GitHub, at the commit this page was made from: the board is Hardware/PCB.kicad_pcb and its schematic Hardware/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Bananek96 before reusing the design.