4 layers24.9 × 0.1 mm
6 layers
6 layer MCU
BaktiyarBr/Rock_Controller- Copper layers
- 6
- Thickness
- 1.58 mm
- Parts
- 75
- Nets
- 90
- Pads
- 292
- Tracks, vias
- 658, 148
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Apr 2024
- Updated
- 22 Oct 2024
Overview
6 layer MCU is an open-source printed circuit board by BaktiyarBr, from the BaktiyarBr/Rock_Controller repository on GitHub. It is a 6-layer board with 75 parts on 90 nets, routed with 658 tracks and 148 vias.
It is built around the STM32F405RGT6, IS25LP064A-JKLE and MPXHZ6130A6U, with the AMS1117-3.3, BNO085 and ST-TF-003A among its other parts. Its parts include 30 capacitors, 21 resistors, 7 connectors, 5 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
6
STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
IS25LP064A-JKLE
WSON-8-EP(5x6)100,000 cycles 10uA 133MHz 2.3V~3.6V 20 Years 64Mbit 800us Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSISSINOR FLASH
MPXHZ6130A6U
SOIC-8-300milPressure SensorsNXP Semiconductors
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometers
ST-TF-003A
UncategorisedUnknown maker
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C9, C10, C11, C12, C15, C25, C26, C27, C28, C29, C30 |
| 13 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C8, C13, C18, C19, C22, C23, C24 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 24p | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R19 |
| 2 | 32.768 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1, Y2 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20, R21 |
| 2 | BLU | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | PWM | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J6, J7 |
| 1 | 170 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 51k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 8MHz 10ppm (X50328MSB2GI) | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | X1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BNO085 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U5 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | IS25LP064A-JKLE | IS25LP064A-JKLE_footprint:SON127P500X600X80-9N | U4 |
| 1 | MPXHZ6130 | Package_SO:SOIC-8_7.5x5.85mm_P1.27mm | U2 |
| 1 | NTC 10k | Resistor_SMD:R_0603_1608Metric | NTC1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | ST-TF-003A | ST-TF-003A_footprint:SUNTECH_ST-TF-003A | P2 |
| 1 | STM32F405RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J1 |
| 1 | VIN | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J3 |
| 1 | power_jumper | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J2 |
More from BaktiyarBr/Rock_Controller
3- 4 layers
- 2 layers25.1 × 0.1 mm
Similar boards
- 2 layers87.7 × 49.2 mm
Oledsndio
mekatronik-achmadi/example_collection
Store My Personal Examples on Development Topics
37 parts2 - 2 layers41 × 56.9 mm
FujiApple DevKit IDC-20
djtersteegc/fujinet-appleii-hardware
Hardware variants for the Apple II FujiNet platform (FujiApple)
32 parts8 - 2 layers55.2 × 38 mm
Coleco adam ade pro embed shield
djtersteegc/coleco-adam-ade-pro-embed-shield
Pro "Mini" version of the Coleco Adam ADE using an Arduino Mega2560 Pro Embed and 0.91" OLED display
25 parts1MIT - 2 layers62.5 × 44 mm
Aduio device [roject
Harshad-vali/esp32-stereo-audio-recorder
ESP32-WROOM-32 based stereo audio recorder with dual I2S MEMS microphones, RTC timestamping, and microSD logging. KiCad hardware design + manufacturing files.
49 parts - 2 layers50 × 100 mm
Rot kb
jacob-jarick/usb-rotary-keyboard
note dip 3 change requires reset/ powercycle of keyboard.
33 partsGPL-3.0 - 2 layers
Esp32s3 pcb
prasannan-robots/Energy-Management-using-Surveillance-Camera
This is a project which uses camera to detect the humans and control indoor appliances
59 parts - 2 layers80.8 × 55.4 mm
Apple-68k FujiNet Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
28 parts142 - 2 layers87.4 × 55.4 mm
Hat fuji-41d
strickyak/tfr9
The TFR/9 Single Board Computer for Hitachi 6309E or Motorola 6809E CPUs (TFR/901)
28 parts12MIT
Questions
What parts does the 6 layer MCU use?
75 parts, built around the STM32F405RGT6, IS25LP064A-JKLE, MPXHZ6130A6U and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 6 layer MCU KiCad files?
From the BaktiyarBr/Rock_Controller repository on GitHub, at the commit this page was made from: the board is 6_layer_MCU/6_layer_MCU.kicad_pcb and its schematic 6_layer_MCU/6_layer_MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 6 layer MCU design in my own project?
Its repository states no licence, so its author keeps all rights: ask BaktiyarBr before reusing the design.