

Budik
SOČ 2019 about smart home concept and improoving it.
- Size
- 74 × 64 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 94
- Pads
- 253
- Tracks, vias
- 450, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Apr 2018
- Updated
- 13 Feb 2019
Overview
Budik is an open-source printed circuit board by BajaCali, from the BajaCali/smart-home repository on GitHub, published under the MIT licence. It is a 2-layer board of 74 × 64 mm with 75 parts on 94 nets, routed with 450 tracks and 12 vias.
It is built around the LD1117S33CTR-HXY, WS2812B and BSS138. Its parts include 27 resistors, 19 capacitors, 15 diodes, 4 switches and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
3LD1117S33CTR-HXY
SOT-223-20℃~+85℃ 1.3V@(800mA) 15V 2mA 3.3V 800mA Fixed Over Temperature Protection SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
side-projects/budik/README.mdBudík
- uses ESP8266
- no beebs, only light
- 12 RGB LEDs - NeoPixels WS2812B
- 2 7_segment displays for seconds
- power from usb charger or 5V battry (recommended charger for LEDs and Wi-Fi)
- 3 buttons for some integration for future (one for alarm itself)
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100R | Resistors_SMD:R_0603 | R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R20, R22, R23, R25, R26 |
| 16 | 100n | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C14, C15, C16, C18 |
| 12 | WS2812B | WS2812B:WS2812B | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12 |
| 3 | 10u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Hand | C13, C17, C19 |
| 3 | 4k7 | Resistors_SMD:R_0603 | R19, R21, R24 |
| 3 | SW_DPST | Buttons_Switches_THT:SW_PUSH-12mm | SW2, SW4, SW5 |
| 2 | 10k | Resistors_SMD:R_0603_HandSoldering | R27, R28 |
| 2 | 10k | Resistors_SMD:R_0603 | R4, R5 |
| 2 | 150R | Resistors_SMD:R_0603 | R6, R7 |
| 2 | LED | LEDs:LED_0805 | D1, D2 |
| 1 | 300R | Resistors_SMD:R_0603_HandSoldering | R3 |
| 1 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | DC04-11_c | Displays_7-Segment:DA56-11CGKWA | AFF1 |
| 1 | D_x2_KCom_AAK | TO_SOT_Packages_SMD:SOT-23 | D3 |
| 1 | ESP-12 | ESP8266:ESP-12 | U1 |
| 1 | FTDI | Pin_Headers:Pin_Header_Angled_1x06_Pitch2.54mm | J3 |
| 1 | LD1117S33CTR | TO_SOT_Packages_SMD:ATPAK-2 | U4 |
| 1 | MCP23018-E_SP | digikey-footprints:DIP-28_W7.62mm | U2 |
| 1 | R_PHOTO | Opto-Devices:Resistor_LDR_5.1x4.3_RM3.4 | R2 |
| 1 | SW_DPST | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_OTG | Connectors:USB_Micro-B | J2 |
The 72 most common of 75 parts.
Similar boards
- 2 layers101.6 × 114.3 mm

- 2 layers155.6 × 86 mm

- 2 layers138.8 × 55 mm

MuxPi
SamsungSLAV/muxpi
MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
354 parts22Apache-2.0 - 2 layers110 × 31.5 mm

- 2 layers47.6 × 30.6 mm

Programator spi
internax/ukol_divelit
Původní záměr byl použít ZIF socket, ten se však pro pDIP8 pouzdro prakticky nevyrábí. Zvolil jsem proto přesnou patici z doporučených komponent. Klíčovými kritérii byl nízký odpor kontaktů a zlaté pokovení pinů.
42 partsMIT - 2 layers325.5 × 240.1 mm

- 2 layers390 × 120.2 mm

- 2 layers89 × 124 mm

Hub20
joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.
183 parts68
Questions
How big is the Budik PCB?
It measures 74 × 64 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Budik use?
75 parts, built around the LD1117S33CTR-HXY, WS2812B and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Budik KiCad files?
From the BajaCali/smart-home repository on GitHub, at the commit this page was made from: the board is side-projects/budik/budik.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Budik design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).